Â
Pro AV Catalog
Request Quote
All Products
1x4 RF Active Splitter with VistaLINK®, 40MHz-3GHz
Model: 7703DA4A-RF
- Low noise amplification and distribution of RF signals from 40MHz to 3GHz
- Wideband frequency response for use with L-Band, 70/140MHz IF and off-air DTV signals
- Wide dynamic range (-10 to -60dBm)
- Protocol independent - handles all modulation formats
- Fully hot-swappable from front of frame
Product Info
Tech Specs
Documents
The 7703DA4A-RF 1x4 Active Splitters provide amplification and distribution of RF signals from 40MHz to 3GHz. The 7703DA4A-RF handle any RF input modulation format and provides 4 isolated outputs for further signal distribution. Typical applications include amplification and distribution of 950MHz - 2150MHz L-Band and 70MHz-140MHz IF signals. Monitoring of RF input power, card status and control gain / attenuation is provided remotely via VistaLINK® capability.
- Low noise amplification and distribution of RF signals from 40MHz to 3GHz
- Wideband frequency response for use with L-Band, 70/140MHz IF and off-air DTV signals
- Wide dynamic range (-10 to -60dBm)
- Protocol independent - handles all modulation formats
- Fully hot-swappable from front of frame
- Comprehensive signal and card status monitoring via four digit card edge display
- Output gain of -10dB to +20dB adjustable in ½dB steps
- AGC mode with adjustable target level
- Input RF signal strength and LNB current monitoring indication
- Optional LNB power (@ +13V or +18V DC with built-in current limiting) and 22kHz tone for LO control
- Above option includes LNB current monitoring with adjustable alarm thresholds for monitoring LNB health
- Remote monitoring through SNMP and VistaLINK® capability
- Spec Sheet available - Yes
- Input Impedance: 75 ohm
- Number of Inputs: 1
- Number of Outputs: 4
- Output Impedance: 75 ohm
- Active Power: 6 Watt
- DC Voltage: 12 Volts
- RF Input Connector: BNC per IEC 61169-8 Annex A (F-Type and SMA optional)
- RF Input Return loss: > 13 dB
- RF Input Frequency Range: 40MHz to 3GHz
- RF Input Power Range: -10 to -60 dBm
- RF Input Current Limit: 400 mA
- RF Input LO Control: 22 kHz on/off
- RF Output Connector: BNC per IEC 61169-8 Annex A (F-Type and SMA optional)
- RF output Return loss: > 14 dB
- RF Output Gain: -10dB to +20dB in 1/2dB steps
- SNR: > 55 dB @ -20dBm input power
- Frequency Response at 40MHz to 200MHz: ±0.75dB
- Frequency Response at 50MHz to 850MHz: ±0.75dB
- Frequency Response at 950MHz to 2150MHz: ±0.75dB
- Frequency Response at 40MHz to 3GHz: ±1.5dB
- Isolation(Output to Output): > 40 dB
- Number of Slots: 1
Splitter
75 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Evertz
Model: 7703DA4A-RF
Request more information from a dealer near you
close
Request more information from a dealer near you
Â