Â
Pro AV Catalog
Request Quote
All Products
4CH 3.0Gbps Multi-rate HD-SDI Fiber Optic Receiver, 4 Fibers, Supports 5 to 2970Mbps, EQ/Re-clocker, 1310nm, Single-mode, -20dBm
Series: HD-4000
Model: HD-4400OG-FRX-50
- Supports SMPTE 424M, 292M, 310M and 259M
- Re-clocking at 270Mbps, 1.483Gbps, 2.970Gbps and DVB-ASI
- Auto-detect of incoming data rate
- Card-edge LEDs for signal presence, rate and other key parameters
- Blind-mating SC fiber connectors
Product Info
Tech Specs
Documents
The fiber optic transport system for openGear platform provides unprecedented flexibility in how handle SDI signal transport. Capable of handling SDI rates from 5Mbps all the way up to 3Gbps uncompressed, these cards will automatically detect the incoming signal and give full control over re-clocking and routing. The table, below, shows the 5 different card sets available in the HD-4000 line. With each module get the same control features that are available both on the front card edge (via dip switches) or through the openGear Dash-Board software. But the true power of the 4000-series is the ability to daisy chain up to five cards to create an 18CH CWDM mux that is ideal for high-density signal trunking. The HD-4000’s also incorporate an integrated cross-point matrix that allows not only the ability to assign a given input signal to one or more outputs, but also to enable and disable outputs should the need arise. There's also an automatic fail-over mode that, when selected, will switch to another input should the signal in the first input somehow fail. Embedded audio is fully supported. All outputs are non-inverting and ASI capable. The cost effective way to move all of HD signals along with the convenience of a built-in switcher, remote monitoring and automatic fail-over protection switching.
- Supports SMPTE 424M, 292M, 310M and 259M
- Re-clocking at 270Mbps, 1.483Gbps, 2.970Gbps and DVB-ASI
- Auto-detect of incoming data rate
- Card-edge LEDs for signal presence, rate and other key parameters
- Blind-mating SC fiber connectors
- 4x4 matrix/cross-point
- 1, 2, 3 or 4 signals/card
- Up to 18 signals/fiber
- Up to 40 signals in 2RU
- Dashboard enabled
- Supports embedded audio and data
- Suitable for studio links, signal trunking, signal distribution, campus interconnects, transmission links, TELCO circuits and outside broadcast B-unit interconnects
- Fiber Optic Signals Supported - Audio
- Fiber Optic Signals Supported - Other
- Warranty - Yes
- Spec Sheet available - Yes
- Warranty (Length/Type): 7 years
- DC Voltage: 12 Volts
- SDI Video Input Type: BNC
- SDI Video Input Impedance: 75 ohms
- Wavelength: 1310 Nm
- Optical Power: -5 to 0 dBm
- Standards: SMPTE 259M-C/292M/425M/297M/DVB/ASI
- Fiber compatibility: Single-mode
- Optical Connector: ST/LC/SC/FC
- SD Operating Distance: up to 40 km
- HD Operating Distance: up to 24 km
- Dimensions: 13 x 3 in
- Temperature Range: -0 to +70 °C
- Humidity Range: 0 to 95 % (Non-condensing)
- Power Requirement: 12Vdc at 10W
- Product Weight: 0.37 lbs
Fiber Optic Transport Card
772 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
MultiDyne Video & Fiber Optic Systems
Model: HD-4400OG-FRX-50
Request more information from a dealer near you
close
Request more information from a dealer near you
Â