Â
Pro AV Catalog
Request Quote
All Products
Patch Panel with 24 x 1/4" Dual Jack, Half Normalled Bottom Row
Series: NYS
Model: NYS-SPP-L1
- Individual grounding available for each channel separately
- Rugged metal housing
- Improved contact design minimizes wear on mated plugs
- Economic and versatile designed 1/4" modular patch panel with 2 rows of jack sockets
- 48 balanced channels with fully PCB wired jack (24 vertical PC boards), 24 front pairs and corresponding 24 rear pairs
Product Info
Tech Specs
Documents
The NYS-SPP-L1 is a economical and remarkable sleek designed 1/4“ modular Patch Panel for 19“ rack mount (19“ x 1U) with a reinforced metal housing. Each of it‘s 48 PCB wired balanced channels (24 front pairs and corresponding 24 rear pairs) can either be grounded separately or in groups of individually chooseable channel numbers. The PCBs are held securely in place by being clamped between the front and the rear panel, this grants an easy reconfiguration of the Patch Panel without the danger of loosing any small parts (e.g. nuts). The grey jack serves as an easy and distinguishable normalling identification.
- Individual grounding available for each channel separately
- Rugged metal housing
- Improved contact design minimizes wear on mated plugs
- Economic and versatile designed 1/4" modular patch panel with 2 rows of jack sockets
- 48 balanced channels with fully PCB wired jack (24 vertical PC boards), 24 front pairs and corresponding 24 rear pairs
- Jack PC card contains 4 balanced 1/4" jacks with non-tarnishing contacts, is held securely in place without the use of nuts - no little pieces to drop, break or lose
- Easy to change configuration by just flipping individual PC board
- Normalling jack is colored grey for easy identification
- 4 designation strips included for front and rear panel
- Patchbay Interface/Port Type - 1/4-inch
- Operating Temperature (Maximum): 176 F
- Operating Temperature (Minimum): -22 F
- Construction: ABS Shell with tin plated bronze contact and steel front
- Rack Units (Height): 1
- Depth: 2.52 in
- Height: 1.73 in
- Width: 18.98 in
- Connection Type: Patch Panel
- Signal Type: AES/EBU Signals (digital)
- Contact Resistance: <10 milliOhms (inner)
- Comment: <10
- dielectric strength: 1 kVdc
- Frequency Range: DC to >50 MHz
- Insulation Resistance: >1Gigaohm at 500Vdc
- Channel Separation: >100dB at 10kHz, 600 terminated
- Handles phantom power: Yes
- Insertion Force: <20 N
- Withdrawal Force: >10 N
- Lifetime: >10000 mating cycles
- Locking Device: Retention spring
- Suitable connectors: A-Gauge 1/4'' plugs acc. EIA RS-453
- Channels: 2 x 24 channels, configuration half normalled, isolated, split
Patch Panels
3251 kb
- Other
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Neutrik USA, Inc.
Model: NYS-SPP-L1
Request more information from a dealer near you
close
Request more information from a dealer near you
Â