Â
Pro AV Catalog
Request Quote
All Products
8200 Lumens XGA 1-chip DLP Fixed Installation Projector
Model: PT-DX820U
- 1-Chip DLP, 8200 lumens, XGA
- Dual lamp system with up to 6000 hours lamp life (in eco mode)
- Lamp relay mode enables 24/7 operation
- Dust-resistant optical engine allows filter-less design
- Multi-screen support including edge blending and colour matching function
Product Info
Tech Specs
Documents
The PT-DX820U 1-Chip DLP Fixed Installation Projector delivering stunning colors and highly flexible projection for museums, exhibitions and digital signage applications.
- 1-Chip DLP, 8200 lumens, XGA
- Dual lamp system with up to 6000 hours lamp life (in eco mode)
- Lamp relay mode enables 24/7 operation
- Dust-resistant optical engine allows filter-less design
- Multi-screen support including edge blending and colour matching function
- Aspect Ratio - 4:3
- HDBaseT - Yes
- Number of Imagers - 1-chip
- Projector Applications - Digital Cinema
- Projector Technology Type - DLP
- Supported Resolution - XGA (1024x768)
- Contrast Ratio: 10000
- Depth: 21.89 in
- Height: 7.87 in
- Operating Humidity: 10% - 80% (no condensation)
- Resolution: 1,024 x 768 pixels (Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.)
- Screen Size: 1.27-15.24 m (50-600 inches), 1.27-5.08 m (50-200 inches) with the ET-DLE055 (4:3 aspect ratio), 2.54-8.89 m (100-350 inches) with the ET-DLE030 (4:3 aspect ratio)
- Width: 19.61 in
- Lamp Type: 420W UHM
- Installation: Ceiling/floor, front/rear
- Regulatory Compliance: HDCP
- Technology: 1-Chip DLP
- Communication Ports: RS232
- Keystone Correction Range: Vertical +/-40°, +/-30° with the ET-DLE055/ET-DLE085/ET-DLE105. Cannot be used when the ET-DLE030 is installed.
- Optical Axis Shift: Vertical: +50% (powered) (+/-45° with the ET-DLE085/ET-DLE105), Horizontal: +/-10% (powered), NOTE: Optical axis shift function cannot be operated when used with the ET-DLE055. If using the ET-DLE030, the optical axis is fixed.
- Power Cord Length: 3m (9ft 10in)
- Product Weight: 40.34 lbs
- Center-to-corner uniformity: 90%
- Brightness Full: 8200 lumens
- Lamp Life Full: 12000 hours
- Chip Quantity: 1
- Communication Formats: RS232C
- Lamp Quantity: 2
- Cabinet materials: Molded plastic
- Operation noise: 40dB (dual lamp operation, lamp mode: normal), 35dB (dual lamp operation, lamp mode: Eco)
- Scanning Frequency YPBPR (YCBCR): 525i(480i): fH 15.75kHz, fV 60Hz, 625i(576i): fH 15.63kHz, fV 50Hz,525p(480p): fH 31.50kHz, fV 60Hz, 625p(576p): fH 31.25kHz, fV 50Hz, 750(720)/60p: fH 45.00kHz, fV 60Hz, 750(720)/50p: fH 37.50kHz, fV 50Hz, 1125(1035)/60i: fH 33.75kHz, fV 60Hz, 1125(1080)/60i: fH 33.75kHz, fV 60Hz, 1125(1080)/50i: fH 28.13kHz, fV 50Hz, 1125(1080)/25p: fH 28.13kHz, fV 25Hz, 1125(1080)/24p: fH 27.00kHz, fV 24Hz, 1125(1080)/24sF: fH 27.00kHz, fV 48Hz, 1125(1080)/30p: fH 33.75kHz, fV 30Hz, 1125(1080)/60p: fH 67.50kHz, fV 60Hz, 1125(1080)/50p: fH 56.25kHz, fV 50Hz
- Operating Temperature (Maximum): 113 F
- Operating Temperature (Minimum): 32 F
- Current Draw: 5.20 Amps
- Scanning frequency (RGB): fH: 15 - 100kHz, fV: 24 - 120Hz, dot clock: 162 MHz or lower
- Terminals SERIAL IN: D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
- Terminals SERIAL OUT: D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
- AC Voltage (Minimum): 120 Volts
- AC Voltage (Maximum): 240 Volts
- Terminals RGB 1 IN: BNC x 5
- Terminals RGB 2 IN: D-sub HD 15-pin (female) x 1
- Terminals VIDEO IN: BNC x 1, 1.0Vp-p, 75 ohms
- Terminals HDMI IN: HDMI 19-pin x 1, Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz - 162 MHz, NOTE: Compatible with non-interlaced signals only.
- DLP™ chip Panel size: 17.8 mm (0.7 in) diagonal (4:3 aspect ratio)
- Terminals DVI-D IN: DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only, 525i (480i), 625i (576i), 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/25p, 1125 (1080)/24p, 1125 (1080)/24sF, 1125 (1080)/30p, 1125 (1080)/60p, 1125 (1080)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz - 162 MHz, NOTE: Compatible with non-interlaced signals only.
- Terminals 3D SYNC 1 IN/OUT: BNC x 1, 1.0Vp-p, 75 ohms, Input: TTL, high impedance. Output: TTL, max. 10 mA
- Terminals 3D SYNC 2 OUT: BNC x 1, 1.0Vp-p, 75 ohms, TTL, max. 10 mA
- Terminals Remoter 1 In: M3 jack x 1 for wired remote control
- Terminals Remoter 1 Out: M3 jack x 1 for link control
- Terminals Remoter 2 In: D-sub 9-pin (female) x 1 for external control (parallel)
- DLP™ chip Display method: DLP™ chip x 1, DLP™ system
- Terminals LAN/DIGITAL LINK: RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compatible with Art-Net, compliant with PJLink™ (class 1), Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz - 162 MHz, NOTE: Compatible with non-interlaced signals only.
- Scanning Frequency (Video/S-Video): fH: 15.75kHz, fV: 60Hz [NTSC/NTSC4.43/PALM/PAL60], fH: 15.63kHz, fV: 50Hz [PAL/PAL-N/SECAM]
- Terminals RGB 1 IN R, G, B: R: 0.7Vp-p, 75 ohms, G: 0.7Vp-p (G: 1.0Vp-p for sync on G), 75 ohms, B: 0.7Vp-p, 75 ohms, HD, VD/SYNC: TTL, high impedance, positive/negative automatic, NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
- Terminals RGB 1 IN Y, PB, PR (Y, CB, CR): Y: 1.0Vp-p (including sync signal), PB/PR (CB/CR): 0.7Vp-p, 75 ohms
- Terminals RGB 1 IN S-Video signal: Y: 1.0Vp-p, C: 0.286Vp-p, 75 ohms
- Terminals RGB 2 IN R, G, B: R: 0.7Vp-p, 75 ohms, G: 0.7Vp-p (G: 1.0Vp-p for sync on G), 75 ohms, B: 0.7Vp-p, 75 ohms, HD, VD/SYNC: TTL, high impedance, positive/negative automatic, NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
- Terminals RGB 2 IN Y, PB, PR (Y, CB, CR): Y: 1.0Vp-p (including sync signal), PB/PR (CB/CR): 0.7Vp-p, 75 ohms
- Scanning Frequency (HDMI/DVI-D): fH: 15 - 100kHz, fV: 24 - 120Hz, dot clock: 25 - 162 MHz
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Panasonic
Model: PT-DX820U
Request more information from a dealer near you
close
Request more information from a dealer near you
Â