Â
Pro AV Catalog
Request Quote
All Products
Active Three-Pair Receiver - Twisted Pair Format-A - balanced line outputs
Series:
Model: TX-TPR3A
- Three -10 dBV Unbalanced or +4 dBu Balanced Outputs
- Phono Jack and Detachable Terminal Block Outputs
- Audio Outputs for All Three Pairs (A, B and C)
- Utilizes All Three Format-A Pairs
- Powered Locally or Remotely through RJ45 Jack
Product Info
Tech Specs
Documents
Accessories
The TX-TPR3A is a three-pair audio receiving module compatible with RDL Format-A twisted pair products. Three outputs are provided corresponding to the three signal pairs A, B and C. The audio signal received on each pair of the RJ45 INPUT jack feeds the corresponding -10 dBV unbalanced RCA phono jack output and the +4 dBu balanced detachable terminal block output. A studio-quality buffer amplifier feeds the outputs at the correct operating level. The TX-TPR3A features bridging inputs, allowing it to be connected to the LOOP OUT jack of other receivers. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio routing systems using RDL FORMAT-A products. The TX-TPR3A may be powered directly from a 24 Vdc power supply using either the power jack or the detachable terminal block. Local power connected to the module is also fed to all modules connected to the INPUT RJ45 jack. The TX-TPR3A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.
- Three -10 dBV Unbalanced or +4 dBu Balanced Outputs
- Phono Jack and Detachable Terminal Block Outputs
- Audio Outputs for All Three Pairs (A, B and C)
- Utilizes All Three Format-A Pairs
- Powered Locally or Remotely through RJ45 Jack
- Local Power Feeds all Modules Connected to INPUT
- Wiring Fault Protection by Automatic Resetting Fuse
- Local Power Input on Terminal Block or dc Power Jack
- Blue LED Indicates Module is Powered
- Studio-Quality Precision Active Balanced Circuitry
- Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): 32 F
- Depth: 2.09 in
- Height: 1.60 in
- Width: 3 in
- Inputs: RDL TP Format-A
- Input Connection: RJ45
- Format-A Signal Pairs Used (3): A, B, C
- Outputs (6): 150 ohm Balanced (3); 1 k ohm Unbalanced (3)
- Output Connection: Detachable Terminal Block (Bal); RCA (Unbal)
- Output Level: +4 dBu Balanced +22 dBu Max; -10 dBV Unbalanced
- Frequency Response: 10 to 50000 Hz
- THD+N: < 0.005 %
- Noise below +4 dBu: < 90 dB
- Crosstalk: < 90 dB (1 kHz); < 75 dB (20 Hz to 20 kHz)
- Headroom above +4 dBu: > 18 dB
- CMRR: > 80 dB (50 Hz to 150 Hz)
- Power Requirement: 24 VDC @ 65 mA plus connected loads
Datasheet for Active Three-Pair Receiver - Twisted Pair Format-A
220626 kb
- Other
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Radio Design Labs
Model: TX-TPR3A
Request more information from a dealer near you
close
Request more information from a dealer near you
Â