Â
Pro AV Catalog
Request Quote
All Products
PCI Express SATA 6Gbps Adapter Card with SSD Socket
Model: SC-SA0T11-S1
- Built-in socket for a 2.5” SATA SSD for space saving and superior drive performance
- Hybrid (HyperDuo) enables 80% of SSD performance at one-third the cost
Note: HyperDuo automatic storage tiering is only compatible with Windows XP, Vista, 7 and 8. This feature is not fully supported in the Server OSes - Hardware RAID (RAID 0, 1 & 10) to offload the host CPU for max performance
- Supports Port Multiplier FIS-based and Native Command Queuing (NCQ)
Note: Only one Port Multiplier is supported at any one time. Supports up to 4 drives connected via Port Multiplier plus 3 single drives for 7 drives total - Supports TRIM to extend the life of SSDs for maximum durability
Product Info
Tech Specs
Documents
SIIG’s SATA 6Gb/s 3i+1 SSD Hybrid PCIe adds 3 internal SATA 6Gb/s channels and 1 SATA SSD socket to your PCIe-equipped system. It is embedded with the fully-automated HyperDuo technology to enable SSD performance at 1/3 of the cost to work flawlessly with the leading 6Gb/s HDDs. This cost-effective hardware RAID (RAID 0, 1, 10) SATA host controller significantly enhances system performance by the capability of SSD acceleration to reduce system boot-up time and allows data to be stored on the high capacity of HDD data storage for cost saving.
Requirements
Desktop PC with an available x2, x4, x8 or x16 PCIe slot
Windows® 8 (32-/64-bit) / 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / Server 2008 R2
Package Contents
SATA 6Gb/s 3i+1 SSD Hybrid PCIe
SATA data cables (2)
Screws (4)
Driver/software CD
Installation guide
- Built-in socket for a 2.5” SATA SSD for space saving and superior drive performance
- Hybrid (HyperDuo) enables 80% of SSD performance at one-third the cost
Note: HyperDuo automatic storage tiering is only compatible with Windows XP, Vista, 7 and 8. This feature is not fully supported in the Server OSes - Hardware RAID (RAID 0, 1 & 10) to offload the host CPU for max performance
- Supports Port Multiplier FIS-based and Native Command Queuing (NCQ)
Note: Only one Port Multiplier is supported at any one time. Supports up to 4 drives connected via Port Multiplier plus 3 single drives for 7 drives total - Supports TRIM to extend the life of SSDs for maximum durability
- HyperDuo mode supports Safe mode and Capacity mode
- 48-bit LBA mode with support up to 4TB hard disk capacity
- Works with the latest 6Gb/s SATA HDDs and backwards compatible with 3Gb/s and 1.5Gb/s HDDs
- Chipset: Marvell 88SE9230
- Compliant with Serial ATA specification, Revision 3.0
- Compliant with PCI Express Base specification, Revision 2.0
- Supports 6Gb/s data transfer rate
- Supports hardware RAID (RAID 0, 1, 10)
- Input Interface: x2 PCI Express Generation 2
- Output Interface: SATA
- Connector:
- 3x 7-pin, SATA, Output
- 1x SSD Socket, 15+7-pin, SATA, Output
- Computer Board/Card Type - Audio
- Computer Board/Card Type - Network
- Computer Board/Card Type - Video
- ROHS Compliant - Yes
- Warranty - Yes
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Number of Channels: 3
- Product Weight: 0.17 lbs
- Warranty (Length/Type): 5 Years Limited
- Certifications: FCC, CE
- Depth: 4.72 in
- Height: 0.79 in
- Width: 5.83 in
Card
644 kb
- Other
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
SIIG
Model: SC-SA0T11-S1
Request more information from a dealer near you
close
Request more information from a dealer near you
Â