Â
Pro AV Catalog
Request Quote
All Products
4-channel High-speed PCI-to-Serial ATA RAID Controller Card
Model: SC-SA4R12-S2
- Supports RAID 0 (striping), RAID 1 (mirroring) and RAID 10 (mirror + striping) for performance and reliability
- Thin, flexible Serial ATA cables make it easier to route inside a PC
- Breaks the 137GB barrier! Supports various brands of large capacity Serial ATA hard drives
- Lower pin count and voltage requirement, plus better cabling over traditional Parallel ATA make Serial ATA the controller of the future
- Four high quality SATA cables and two dual connector SATA power cables required for RAID configuration are included
Product Info
Tech Specs
Documents
SIIG’s Serial ATA 4-Channel RAID host adapter is an ideal solution for expanding your SATA storage capacity to your desktop computer. It is designed to add four SATA channels for connecting up to four additional SATA hard disk drives. This Serial ATA RAID host adapter can be configured as a standard 4 channel host controller or with RAID 0 (striping), RAID 1 (mirroring) or RAID 10 (mirror + striping) for performance, reliability or both respectively. Additionally, it can be used as a boot or secondary controller and will co-exist with most existing on-board Ultra ATA controllers.
Package Contents
Serial ATA 4-channel RAID
4 Serial ATA data cables
2 Dual-connector SATA power cables
2 "Y" split power cables
Driver and utility software CD
Installation guide
- Supports RAID 0 (striping), RAID 1 (mirroring) and RAID 10 (mirror + striping) for performance and reliability
- Thin, flexible Serial ATA cables make it easier to route inside a PC
- Breaks the 137GB barrier! Supports various brands of large capacity Serial ATA hard drives
- Lower pin count and voltage requirement, plus better cabling over traditional Parallel ATA make Serial ATA the controller of the future
- Four high quality SATA cables and two dual connector SATA power cables required for RAID configuration are included
- Two “Y” split power cables are also included to provide extra power connection
- Chipset: Silicon Image SiI3114
- Port type: Four Serial ATA ports
- Slot type: 32-bit PCI
- Compliant with Serial ATA Specification, revision 1.0
- Compliant with PCI Specification, revision 2.2
- Supports 48-bit LBA and verified to work with up to 4TB drives
- Supports RAID 0 (striping), RAID 1 (mirroring) and RAID 10 (mirror + striping)
- Coexists with Ultra ATA controller and allows you to connect up to four Serial ATA drives
- Features independent 256-byte FIFOs per channel for host reads and writes
- Features Watch Dog timer for fault resiliency and flash memory for future BIOS updates
- Supports 32-bit wide PCI bus at 66MHz
- Supports data transfer rates up to 150 MB/s (1.5Gb/s)
- Requirements
- Pentium or equivalent PC with one available PCI slot
- Windows® 8 (32-/64-bit) / 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / 2000
- Computer Board/Card Type - Audio
- Computer Board/Card Type - Network
- Computer Board/Card Type - Video
- ROHS Compliant - Yes
- Warranty - Yes
- External Ports: 4
- Warranty (Length/Type): Lifetime Limited
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Certifications: FCC, CE
Card
781 kb
- Other
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
SIIG
Model: SC-SA4R12-S2
Request more information from a dealer near you
close
Request more information from a dealer near you
Â