Â
Pro AV Catalog
Request Quote
All Products
T1 or E1 Carrier Signals Over Fiber
Model: F-E1T1
- Extends T1 /E1 up to 120Km
- Single or dulal fiber transmision
- Multiple T1/E1
- WDM option to achieve single fiber bi-directional transmission
- Multi-communications transmitting wavelength and power optional
Product Info
Tech Specs
Documents
The F-E1T1 fiber converters allow extension of a single T1 or E1 RJ45 / RJ48c 100ohms port over multi-mode or single-mode fiber. The standard interface for fiber optics is the SC/APC connector. T1 interface can be framed or unframed. The fiber converter is totally transparent to the T1 signal. Applications include extension of smart-jacks over fiber, PBX interconnection or T1/E1 transport .
T1/E1 fiber modem provide synchronous, full duplex, half duplex, or simplex data transmission at 1.544 Mbps (T1) and 2.048 Mbps (E1), at distances up to 120 km with fully transparent operation. This product supports ANSI T1.403, AT&T TR54016 and AT&T TR62411 T1 standards, and CCITT G.703, G.824, G.955 E1 standards. Several different configurations are offered to accommodate a wide variety of fiber optic needs.
- Extends T1 /E1 up to 120Km
- Single or dulal fiber transmision
- Multiple T1/E1
- WDM option to achieve single fiber bi-directional transmission
- Multi-communications transmitting wavelength and power optional
- Fiber Optic Connector Type - Other
- Fiber Optic Signals Supported - Other
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 149 F
- Operating Temperature (Minimum): -4 F
- Active Power: 4 Watt
- DC Voltage: 12 Volts
- Operating wavelength: 850nm, 1310nm, 1550nm, or CWDM Wavelenghts
- Reciever Sensitivity: -30 dBm
- Transmitter Power: -3 dBm
- T1/E1 Interface Protocol: AMI or B8ZS (Synchronous)
- Data Rate: 1.544 Mbps (T1) / 2.048 Mbps (E1)
- Operation: Full Duplex, Half Duplex, Simplex
- Error Rate: Better than 10 to the minus 12th
- Electrical Connector: RJ45/RJ48 port with DCE/DTE switch
- Digital Interface:
F240x (T1) ANSI T1.403, AT&T TR54016, and TR6241119 standards
F241x (E1) G.703, G.824, and G.955 standards - Storage Temp: -40 ~ 85 °C
- Relative Humidity: 5 ~ 95 %
- Depth: 4.17 in
- Height: 1.30 in
- Width: 5.12 in
T1 or E1 Carrier Signals Over Fiber
356 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Thor Fiber
Model: F-E1T1
Request more information from a dealer near you
close
Request more information from a dealer near you
Â