Â
Pro AV Catalog
Request Quote
All Products
Compact CATV RF Over Fiber Receiver
Model: F-RF
- Optical Automatic Gate Control (AGC)
- Able to recieve optical signals in either 1310nm or 1550nm bands.
- All working parameters controlled by a microprocessor
- Compact Form Factor
- Adjustable RF Output power
Product Info
Tech Specs
The Thor F-RF system is using for the transport and distribution of CATV RF signals over fiber optic cable. The transmitter converts the incoming RF signal (870 MHz) to an optical signal. This optical signal can be distributed to multiple end points with a coupler, or can be run more than 20 miles over a singlemode fiber optic cable. Often times a full size rackmount receiver is not needed at the endpoints. The CATV mini receiver is used as a low cost end point when rack equipment is not needed. The units have adjustable RF output level to drive multiple displays and ship with robust external power supplies. These units can also be used to make low cost 'Fiber Breaks'. A Fiber Break allows RF to pass in only one direction and are essential for high level data security. Without an RF return path, the system cannot be modified to extract data over an RF line.
- Optical Automatic Gate Control (AGC)
- Able to recieve optical signals in either 1310nm or 1550nm bands.
- All working parameters controlled by a microprocessor
- Compact Form Factor
- Adjustable RF Output power
- No need to program parameters
- Fiber Optic Connector Type - Other
- Fiber Optic Signals Supported - Other
- Rackmountable - Yes
- Operating Temperature (Maximum): 149 F
- Operating Temperature (Minimum): 23 F
- AC Voltage (Maximum): 265 Volts
- AC Voltage (Minimum): 90 Volts
- Active Power: 50 Watt
- Maximum Frequency Response (Bandwidth): 862000 kHz
- Maximum Frequency Response (Bandwidth): 862000000 Hz
- Minimum Frequency Response (Bandwidth): 45000 kHz
- Minimum Frequency Response (Bandwidth): 45000000 Hz
- Wavelength: 1310 - 1568 Nm
- Linewidth: < 1 MHz
- Side Mode Suppression Ratio: > 45 dB
- Return Loss: > 55 dB
- Input Level: 19 - 21 dBmV
- Flatness: <± 0.75
- Input Impedance: 75 ohm
- RF Interface: F-Type
- Transmit Channel: PAL-D/60CH, NTSC/80CH
- CNR: > 50 dB
- CTB: < -63 dB
- CSO: < -57 dB
- SBC restrain: > 17 dBm
- Network Managment: RJ45 & RS232, Supports I.E. & SNMP
- Storage Temp: -40 - 85 °C
- Operating Humidity: 5 - 95 %
- Rackmountable: Yes
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Thor Fiber
Model: F-RF
Request more information from a dealer near you
close
Request more information from a dealer near you
Â