Â
Pro AV Catalog
Request Quote
All Products
8 Output Expander
Series: iDR
Model: iDR-Out
Part #: AH-iDR-Out
- RJ45 connector
- Proprietary 8 channel digital audio
- Connects to iDR-4 or iDR-8 main unit
- CAT5 STP cable up to 250 metres (825 feet)
- 24bit resolution
Product Info
Tech Specs
Documents
The iDR-Out audio expander provides an additional 8 line outputs on XLR when connected to an iDR-4 or iDR-8.
iDR-Out connects to the main iDR unit, which can be up to 250 metres away, via CAT5 STP cable. iDR-Out has 8 front panel LEDs in addition to the 3 status indicators; these are 3-colour soft LEDs which can be assigned as audio meters, mute indicators or presets related indicators and are programmed in the usual way using the iDR System Manager software.
iDR-Out connects to the main iDR unit, which can be up to 250 metres away, via CAT5 STP cable. iDR-Out has 8 front panel LEDs in addition to the 3 status indicators; these are 3-colour soft LEDs which can be assigned as audio meters, mute indicators or presets related indicators and are programmed in the usual way using the iDR System Manager software.
- RJ45 connector
- Proprietary 8 channel digital audio
- Connects to iDR-4 or iDR-8 main unit
- CAT5 STP cable up to 250 metres (825 feet)
- 24bit resolution
- Serial control of iDR expander units
- Proprietary Allen & Heath control protocol
- IN and OUT ports provided to allow daisy chaining through multiple units
- CAT5 STP cable up to 300 metres (1000 feet)
- Universal mains input switched mode design
- IEC 3pin
- Country dependent mains lead supplied
- Rear panel power on/off switch
- Power –mains power on
- Link – iDR-Link control communicating
- Lock –audio communicating
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Number of Outputs: 8
- Total Harmonic Distortion + Noise (THD+N): 0.01 %
- Depth: 9.13 in
- Height: 1.73 in
- Width: 19.02 in
- Product Weight: 7.72 lbs
- Connector: Male 3pin XLR
- Impedance: <75 ohms
- Maximum Output: +18 dBu
- Crosstalk: <-80 dB @ 1kHz, 0dB gain
- Residual Output Noise: <-93 dBu
- Input to output noise @: 0 dB gain <-87dBu
- Input to output noise @: 50 dB gain <-73dBu
- Latency: <2.4ms expander XLR to/from iDR XLR
- AC Mains Input: 100 to 240 V AC 50/60Hz, 25VA max
- Fuse: T500mAL 20mm
Expander
1214 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Allen & Heath
Model: iDR-Out
Request more information from a dealer near you
close
Request more information from a dealer near you
Â