Â
Pro AV Catalog
Request Quote
All Products
SDI to Fiber Receiver
Model: SDI-FIB-Rx
- SDI to Fiber Extension set includes; transmiter / extender and receiver
- Supports SDI up to 3G
- Extends multi-rate HD-SDI up to 18 miles (30 Km) over a single fiber
- Extends multi-rate 3G-SDI up to 12.5 miles (20 Km) over a single fiber
- Equalized inputs and reclocked outputs - up to 120 meters for 3G-SDI, up to 140 meters for HD-SDI
Product Info
Tech Specs
Documents
SDI Receiver over fiber optic cable with ST connector. SMPTE fiber compliant. Extends SD SDI and HD SDI signals up to 30 Km and 3G SDI up to 20 Km over a single mode fiber. Output is reclocked.
This SDI to Fiber extension set includes an SDI to Fiber Transmitter and Receiver for transmitting multi-rate SDI up to 18 miles (30 Km) over fiber using a single-mode or multi-mode fiber optic cable with ST connectors.
It is a miniature-style extension solution that supports all SDI formats up to 3G including; SMPTE-424M (3G-SDI), SMPTE-292M (HD-SDI), and SMPTE-259M (SD-SDI) protocols.
To prevent signal loss, input signals are equalized and ouputs reclocked to 120 meters for 3G-SDI and 140 meters for HD-SDI.
- SDI to Fiber Extension set includes; transmiter / extender and receiver
- Supports SDI up to 3G
- Extends multi-rate HD-SDI up to 18 miles (30 Km) over a single fiber
- Extends multi-rate 3G-SDI up to 12.5 miles (20 Km) over a single fiber
- Equalized inputs and reclocked outputs - up to 120 meters for 3G-SDI, up to 140 meters for HD-SDI
- Uses single-mode or multi-mode fiber optic cable with ST connectors
- Robust miniature-style metal die-casting enclosure for harsh environments
- Enviro-Packaging Policy - Yes
- Energy Star rated - Yes
- EPEAT Evaluation - Yes
- Wireless - Yes
- Spec Sheet available - Yes
- Broadband Signals Supported: No
- Energy Star rated: Yes
- Enviro-Packaging Policy: Yes
- EPEAT Evaluation: Yes
- IP Signals Supported: No
- ISO 14001 Certification: No
- Manufacturing Powered by Alternative Energy: No
- ROHS Compliant: No
- Take-Back Recycling Program: No
- Operating Temperature (Maximum): 158 F
- Operating Temperature (Minimum): -4 F
- Number of Channels: 1
- Current Draw: 1.50 Amps
- DC Voltage: 5 Volts
- INPUT: 1 x ST via Fiber
- Outputs: 1 x 3G, HD and SD-SDI via 75 ohm BNC
- Components: InGaAs/InP PIN photo diode
- Storage Temperature: -22 to 185 Degree F (-30 to 85 degree C)
- Humidity: 0 to 95 %RH non-condensing
- Dimensions: 19.5 x 19.5 x 50.7 mm)
Apantac-Datasheet-SDI-FIB.pdf
157774 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Apantac
Model: SDI-FIB-Rx
Request more information from a dealer near you
close
Request more information from a dealer near you
Â