Pro AV Catalog

< Back to Previous Page

Home : Audio Production Equipment : Ashly Audio, Inc. - pema8125

All Products

8-channel 250W Protea Equipped Network DSP Power Amplifier

Series: pema Series

Model: pema8125

4 or 8-channel amplifier
8 built-in mic pre’s
2-bit SHARC DSP
Dedicated telephone/PBX input
Post DSP Aux line level outputs

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Pema sets new industry benchmark for value-engineered zone sound systems. By seamlessly merging Ashly’s powerful, open-architecture DSP functionality with Ashly’s renowned amplifier performance inside two-rack space unit, pema lowers overall system cost, occupies less space, improves energy efficiency, and both speeds and simplifies system installation and programming. Four and eight amplifier channel versions are available at both 125 and 250 Watts per channel. Full 96kHz performance is available on 32-bit SHARC processors for utterly transparent audio.

4 or 8-channel amplifier
8 built-in mic pre’s
2-bit SHARC DSP
Dedicated telephone/PBX input
Post DSP Aux line level outputs
Stereo summed to mono
Event scheduling (RTC)
Adjustable HP/LP filters
Ambient noise compensation
Automatic feedback suppression
8-in x 8-out sophisticated matrix mixing
Dual RCA and balanced euroblock inputs
Built-in pink/white noise and sine wave generator
Gain sharing automatic microphone mixing (Automixer)
125 or 250 watts per channel, Low-Z and constant voltage Models (70V and 100V)

Amplifier Type - Power Amplifier
Warranty - Yes
Transformer Option - Yes
Rackmountable - Yes
Low Voltage Control - Yes
Must be Level - Yes
Dante Enabled - Yes
Loudspeaker Voltage - 70V
Loudspeaker Voltage - 100V
Spec Sheet available - Yes

Maximum Frequency Response (Bandwidth): 20 kHz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Low Voltage Control: Yes
Must be Level: Yes
Rackmountable: Yes
Transformer Option: Yes
Thermal Dissipation (1/3 Power Sine Wave): 251 BTU/Hour
Warranty (Length/Type): 5 Years Limited
AC Voltage: 120 Volts
Active Power: 125 Watt
Current Draw: 1.70 Amps
Depth: 15.50 in
Height: 3.50 in
Width: 19 in
Product Weight: 21 lbs
Mount Type: Rack
70V Taps: 125 Watt
100V Taps: 125 Watt
Certifications: FCC, CE
Minimum Frequency Response (Bandwidth): 20 Hz
Maximum Frequency Response (Bandwidth): 20000 Hz
Signal to Noise Ratio: 102 dB
Number of Channels: 8
Number of Inputs: 8
Number of Outputs: 8
Total Harmonic Distortion + Noise (THD+N): 0.50 %
Number of Watts Per Channel: 250 Watt
Rack Units (Height): 2
Operating Temperature (Maximum): 120.20 F
Operating Temperature (Minimum): 39.20 F

Power Amplifier 792 kb - Data Sheet

Power Amplifier 2138 kb - Other