Â
Pro AV Catalog
Request Quote
All Products
End-address hypercardioid condenser microphone (freq. response: 20-20,000 Hz) (externally polarized)
Series: 40
Model: AT4053b
- Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
- Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Direct-coupled, balanced output results in a clean signal even under high-output conditions
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- Switchable 80 Hz hi-pass filter and 10 dB pad
Product Info
Tech Specs
Documents
This versatile studio performer may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. And its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS). The AT4053b consists of two modular subassemblies: an AT4900b-48 body and an AT4053b-EL hypercardioid head capsule (both available separately). Additional interchangeable capsules are available in omnidirectional (AT4049b-EL) and cardioid (AT4051b-EL).
- Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
- Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Direct-coupled, balanced output results in a clean signal even under high-output conditions
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- Switchable 80 Hz hi-pass filter and 10 dB pad
- Rugged turned-brass microphone housing for enduring dependability
- State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards
- RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)
- Microphone Connectivity - Wired
- Microphone Type - Condenser
- Polar/Pickup Pattern - Hypercardiod
- Warranty - Yes
- ROHS Compliant - Yes
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Dynamic Range: 129 dB
- Impedance: 50 ohm
- Maximum SPL (Sound Pressure Level): 155 dB
- Sensitivity: -34 dB
- Signal to Noise Ratio: 78 dB
- Wireless: No
- Current Draw: 0 Amps
- DC Voltage: 48 Volts
- Product Weight: 0.28 lbs
- Noise: 16 dB
- Warranty (Length/Type): Five-Year/Limited End-User
- Dimensions: 155.0 mm (6.10") long, 21.0 mm (0.83") diameter
- ROHS Compliant: Yes
AT4053b Submittal Sheet
371 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Audio-Technica U.S., Inc.
Model: AT4053b
Request more information from a dealer near you
close
Request more information from a dealer near you
Â