Â
Pro AV Catalog
Request Quote
All Products
Subminiature cardioid condenser lavalier microphone with battery/phantom power operation
Series: Broadcast & Production
Model: AT898
- Maximum intelligibility and clean, accurate reproduction for lecturers, stage and television talent, and houses of worship
- Low-profile design (a mere 5mm in diameter) is ideal for applications requiring minimum visibility
- Operates on battery or phantom power
- Extensive array of provided accessories includes a clothing clip, viper clip, magnet clip and lanyard (black models only), windscreens, interchangeable single and double mic holders
- Accessories available separately
Product Info
Tech Specs
Documents
Accessories
The AT898 is a subminiature clip-on/lavalier condenser microphone with a cardioid polar pattern. It is designed to provide accurate reproduction for vocalists, lecturers, stage and television talent, and houses of worship. The microphone is intended to be worn on the clothing or hidden in props for excellent yet unobtrusive sound pickup. The wide-range capability of the microphone ensures clean, accurate reproduction with high intelligibility for speakers, presenters and other performers. Its small size makes it ideal for use in applications where minimum visibility is required. The microphone requires 11V to 52V phantom power or a 1.5V AA battery for operation. A battery need not be in place for phantom power operation. The microphone's cardioid polar pattern provides a 120° angle of acceptance. The microphone includes a 3m (9.8') permanently attached miniature cable. Its free end connects to the provided AT8537 power module via TA3F-type connector. The output of the power module is a 3-pin XLRM type connector.
- Maximum intelligibility and clean, accurate reproduction for lecturers, stage and television talent, and houses of worship
- Low-profile design (a mere 5mm in diameter) is ideal for applications requiring minimum visibility
- Operates on battery or phantom power
- Extensive array of provided accessories includes a clothing clip, viper clip, magnet clip and lanyard (black models only), windscreens, interchangeable single and double mic holders
- Accessories available separately
- 9.8ft (3.0m) cable permanently attached to mic, TA3F connector at power module
- RoHS compliant—free from all substances specified in the EU directive on hazardous substances
- Microphone Connectivity - Wired
- Microphone Type - Condenser
- Polar/Pickup Pattern - Cardiod
- Warranty - Yes
- ROHS Compliant - Yes
- Spec Sheet available - Yes
- Cable Length: 9.84 ft
- Maximum Frequency Response (Bandwidth): 15 kHz
- Maximum Frequency Response (Bandwidth): 15000 Hz
- Minimum Frequency Response (Bandwidth): 200 Hz
- Minimum Frequency Response (Bandwidth): 0.20 kHz
- Dynamic Range: 100 dB
- Maximum SPL (Sound Pressure Level): 131 dB
- ROHS Compliant: Yes
- Signal to Noise Ratio: 63 dB
- Wireless: No
- Current Draw: 0 Amps
- Product Weight: 0.22 lbs
- Warranty (Length/Type): 5 Years/Limited End-user
- Impedance: 250 ohm
- Element: Fixed-charge back plate, permanently polarized condenser
- Power Module: In-line
- connector type: XLRM-type (power module)
- Low Frequency Roll-off: 80Hz, 12dB per octave
- Battery Type: 1.5V AA/UM3
- Battery Current/Life: 0.4mA/1200 hours typical (alkaline)
- Length: 0.91 in
- Body Diameter: 0.21 in
- DIMENSIONS (POWER MODULE): 5.71 (long), 0.83 (diameter) in
- OUTPUT CONNECTOR (POWER MODULE): Integral 3-pin XLRM
- Case Style: M30
- Sensitivity: -43 (Phantom)/-46 (Battery) dB
- DC Voltage: 11 to 52 Volts
AT898 Submittal Sheet
369 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Audio-Technica U.S., Inc.
Model: AT898
Request more information from a dealer near you
close
Request more information from a dealer near you
Â