Pro AV Catalog

< Back to Previous Page

Home : Signal Processing Systems : Burst Electronics, Inc.. - VM-2

All Products

Two Channel Video Mixer with Remote Control

Model: VM-2

Allows fade between two genlocked video signals
Fade from A to B and B to A
GPI trigger
Fade "take" is both local and GPI remote controlled
More cost effective

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The VM-2 is a two channel video mixer. The unit allows fade between two genlocked video signals. The fade "take" is both local and GPI remote controlled. Fade rate is adjustable from approximately 5 frames to 5 seconds. The VM-2 is similar to the VMF-2, but without the Remote Control Unit (RCU). If fade to black is required, then our Model VMF-2 is the solution. The more cost effective VM-2 does not include fade to black.

Allows fade between two genlocked video signals
Fade from A to B and B to A
GPI trigger
Fade "take" is both local and GPI remote controlled
More cost effective

Processor Type - Video
Warranty - Yes

Input/Output: 1 Volt standard video
Video Connector: BNC
GPI Trigger: Contact closure initiates action
Output Protection: Open or Short, infinite duration
Preset Fade Speeds: 1/2, 1, 2 Sec
User Adjustable Speeds: 5 frame to 5 seconds
Bandwidth: 10 MHz @ 0.5 dB
Diff Gain: 0.1 %
Diff Phase: 0.1 degree
S/N: 60 dB
Crosstalk: 60 dB
DC Powered: 11-14 VDC
Width: 4.10 in
Height: 1.50 in
Depth: 5.50 in
Input Impedance: 75 ohm
Number of Inputs: 2
Number of Outputs: 1
Output Impedance: 75 ohm
AC Voltage: 120 Volts
Current Draw: 0.50 Amps
DC Voltage: 12 Volts
Warranty (Length/Type): 2 years
Sampling Rate/Frequency: 60 Hz
Sampling Rate/Frequency: 0.06 kHz
Sampling Rate/Frequency: 0 Ghz

Two Channel Video Mixer, Remote Control 43 kb - Brochure