Â
Pro AV Catalog
Request Quote
All Products
Black Ceiling Microphone Array Kit for INTERACT AT
Series:
Model: Black Ceiling Microphone Array kit for Interact AT
Part #: 910-001-014-B
- Full 360-degree coverage
- Three unidirectional elements reduce reverberation and noise
- Design minimizes noise pickup fron ceiling sources
- Optimized to work with ClearOne mixers, CONVERGE Pro, INTERACT Pro, INTERACT Pro 8i, INTERACT AT
- Multiple ceiling microphone arrays can be connected to any mixer for covering a large room space
Product Info
Tech Specs
Documents
Black ceiling microphone array kit for INTERACT AT includes RJ45 receptacle to XLR-M mixer adapter. Microphone array enhances any conferencing application which demands high-quality audio. Easily installed and affordable, the ceiling microphone array delivers unbeatable conferencing sound with a most unobtrusive microphone placement option. Three, wide-range microphones are mounted together into a single unit array, providing rich sound of three individual unidirectional microphones while maintaining full 360 degree coverage.
- Full 360-degree coverage
- Three unidirectional elements reduce reverberation and noise
- Design minimizes noise pickup fron ceiling sources
- Optimized to work with ClearOne mixers, CONVERGE Pro, INTERACT Pro, INTERACT Pro 8i, INTERACT AT
- Multiple ceiling microphone arrays can be connected to any mixer for covering a large room space
- Standard CAT5 Ethernet cable runs back to the mxer
- Designed for quick installation into drop ceiling tiles
- Includes 12 and 24-inch drop down cables for varying ceiling heights
- Sleek unobtrusive design
- Frees table area while maintaining speech quality and intelligibility
- Number of ceiling microphone arrays depends on the maximum number of microphone inputs supported by the mixer
- Spec Sheet available - Yes
- Polar Pattern: Cardioid
- Dynamic Range: 80 dB (1 kHz at maximum SPL)
- Signal/Noise Ratio: 60 dBA (1kHz at 1Pa)
- Frequency Response: 100 Hz to 12kHz
- Sensitivity: 114 mV/Pa
- Element: Fixed-charge back plate permanently polarized condenser
- Phantom power requirement: 12 to 52 vdc, 2 mA typical
- Impedance: 200 ohms
- Maximum cable length from array to mixer: 300 ft
- Diameter: 1.50 in
- Height: 3.30 in
- Product Weight: 2.20 lbs
Ceiling Microphone Array Kit
528 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
ClearOne
Model: Black Ceiling Microphone Array kit for Interact AT
Request more information from a dealer near you
close
Request more information from a dealer near you
Â