Â
Pro AV Catalog
Request Quote
All Products
Type 10 Direct Box
Model: DT10
- Indestructable - Armored inside and out, with a molded core wrapped in an extra thick architectural alumininum housing
- Versatile - Has rock solid isolation and is designed to drive any board across hundreds of feet of cable whether or not you have phantom power
- Pure and Simple - Handle sizzling hot outputs from active keyboards using the -15 dB pad with virtually immeasurable distortion
- With an analog circuit that tunes itself to deliver your sound with the lowest distortion, lowest noise, and highest accuracy
- Supremely accurate response
Product Info
Tech Specs
Documents
The Type 10 DI box is the ideal counterpart to our classic Type 85, combining the exceptional ruggedness and versatility of the Type 85 with an advanced design that sets a new standard for pure performance. Most direct box designs must make difficult tradeoffs with your sound: ultra-low distortion can only be attained by increasing input noise; true ground isolation means high phase deviation or signal attenuation. The Type 10 takes a radically new approach, with an analog circuit that tunes itself to deliver your sound with the lowest distortion, lowest noise, and highest accuracy of any direct box. The result is a clean, precise sound that is completely faithful to the original. The Type 10 achieves the highest SNR, lowest phase deviation, and lowest distortion of any DI. Some boxes achieve low distortion over a narrow range of frequencies and levels, but end up coloring the low frequencies and distorting loud signals. The Type 10 maintains exceptionally low THD and IMD across the entire audio band, and for a wide range of input voltages, rendering your sound with extremely high fidelity.
- Indestructable - Armored inside and out, with a molded core wrapped in an extra thick architectural alumininum housing
- Versatile - Has rock solid isolation and is designed to drive any board across hundreds of feet of cable whether or not you have phantom power
- Pure and Simple - Handle sizzling hot outputs from active keyboards using the -15 dB pad with virtually immeasurable distortion
- With an analog circuit that tunes itself to deliver your sound with the lowest distortion, lowest noise, and highest accuracy
- Supremely accurate response
- Ultra-wide, flat bandwidth
- Built extremely tough for the road
- Phantom/battery power test feature
- Rock-solid transformer isolation
- Spec Sheet available - Yes
- Depth: 6 in
- Height: 3 in
- Width: 1.75 in
- Product Weight: 1.30 lbs
- Noise: 1.8 ?Vrms
- Frequency Response: 10 to 50000 Hz (+/- 1 dB)
- Deviation From Linear Phase: +2(30 Hz), 0 (100 Hz to 20 kHz) deg
- Distorton THD at 1 kHz: Less than 0.001 %
- DistortionTHD at 30 Hz to 20 kHz: less than 0.005 %
- Distortion IMD: less than 0.005 % (10 kHz/60 Hz, 4:1)
- Power Options: 48 V Phantom (1.5 mA), 9V
- Battery: 4.8 mA 130 hrs. on a typical alkaline
- Input Protection: 220 Vrms
- Transformer Isolation Voltage: greater than 500 V
- Padding Settings: 0, -15, -30 dB
- RF Filtering(input): 1.5 MHz
- RF Filtering(output): 60 kHz
- Maximum Input Level at 0 dB pad: 6 Vpp (1% THD)
- Maximum Input Level at -15 dB pad: 33 Vpp (1% THD)
- Maximum Input Level at -30 dB pad: 190 Vpp (1% THD)
- Input Resistance at 0dB pad: 10 Mohm
- Input Resistance at -15, -30 dB pad: 10 kohm
- Input Capacitance: 240 pF
- Output Polarity: Pin 2 positive
Type 10 datasheet.pdf
895 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Countryman Associates, Inc.
Model: DT10
Request more information from a dealer near you
close
Request more information from a dealer near you
Â