Pro AV Catalog
50-18000Hz Electret-type Lectern Microphone with Shock Mount
Model: Lectern Microphone with Shock Mount
- Extra-sensitive electret microphone element
- Unidirectional (cardioid) pick-up pattern for more gain before feedback
- Built-in electronic circuitry custom-contoured for natural voice reproduction
- Slim, flexible 19" gooseneck
- Non-glare satin black finish
The Lectern Microphone has an electret-type element which offers miniature size and super sensitivity. Its unidirectional pickup pattern and uniform response minimizes acoustic feedback and off-axis coloration.
The built-in preamp and custom circuitry design control the low frequency roll off and contours the mid and high frequencies to give a clear, natural voice reproduction. The mic requires phantom power; 9 to 52 volts DC.
While the gooseneck is slim, its rugged construction will hold the microphone at any position. The hard black chrome finish won't scratch or wear and the equipment end of the gooseneck is terminated with a male XLR connector which plugs directly into the mic input jack.
The miniature windscreen controls wind noise and breath "pop" when talking close to the microphone. The stiffener improves the aesthetic appearance and aids in positioning the microphone when used with a lectern.
- Extra-sensitive electret microphone element
- Unidirectional (cardioid) pick-up pattern for more gain before feedback
- Built-in electronic circuitry custom-contoured for natural voice reproduction
- Slim, flexible 19" gooseneck
- Non-glare satin black finish
- Miniature slip-on windscreen prevents breath 'pop'
- Professional-quality male XLR connector
- Microphone Type - Electret Condenser
- Polar/Pickup Pattern - Cardiod
- Polar/Pickup Pattern - Unidirectional
- Maximum Frequency Response (Bandwidth): 18000 Hz
- Maximum Frequency Response (Bandwidth): 18 kHz
- Minimum Frequency Response (Bandwidth): 50 Hz
- Minimum Frequency Response (Bandwidth): 0.05 kHz
- Impedance: 600 ohm
- Maximum SPL (Sound Pressure Level): 130 dB
- Signal to Noise Ratio: 40 dB
- DC Voltage: 52 Volts
- Height: 24 in
- Width: 0.51 in
- Product Weight: 0.40 lbs
- Color: Black
- Output level at 1000Hz: -70 +/-3dB (0.32mV) (OdB = 1volt/microbar)
- Front-to-back Ratio: 20dB
- Current Drain: 2.0ma typical
- Windscreen: Black urethane foam
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com