Â
Pro AV Catalog
Request Quote
All Products
Analog/SD SDI to SD SDI/Optical Converter with TBC and Frame Sync
Series: BrightEye
Model: BE 1
- Use with cameras, satellite receivers and VHS decks
- Analog and SD SDI input
- SD SDI and optical output
- TBC and frame sync
- 12-bit processing
Product Info
Tech Specs
Documents
This BrightEye 1 is a comprehensive analog/SD SDI to SD SDI/optical converter for signal acquisition. With analog component, analog composite S-Video (Y/C) and SDI video inputs, it can take on any video source. The built-in time base corrector/frame synchronizer provides a rock steady output, even with marginal inputs. The reference input is used to genlock the converter output to house reference such as color black. Front panel controls select input source, format and adjust video gain. Video levels can be adjusted through BrightEye Mac or PC software. Simultaneous SD SDI (electrical) and optical outputs are provided, so you can deliver the signal just about anywhere. Both Color Bars and the SD SDI Checkfield (Pathological) test patterns are included to facilitate transmission path testing.
- Use with cameras, satellite receivers and VHS decks
- Analog and SD SDI input
- SD SDI and optical output
- TBC and frame sync
- 12-bit processing
- Passes embedded audio
- Built-in time base corrector/frame synchronizer
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- AC Voltage: 230 Volts
- DC Voltage: 12 Volts
- Peak Power: 7 Watt
- Depth: 5.50 in
- Height: 0.80 in
- Width: 5.63 in
- Product Weight: 0.87 lbs
- Warranty (Length/Type): 5 years
- Number of Serial Digital Input: 1
- Serial Digital Input Signal Type: 270Mbps SD Serial Digital (SMPTE 259M)
- Serial Digital Input Impedance: 75 ohms
- Serial Digital Input Return Loss: >15 dB
- Number of Analog Input: 1
- Analog Input Types: Beta/SMPTE, Y, Pr, Pb/NTSC, PAL Composite/NTSC, PAL S-Video
- Analog Input Impedance: 75 ohms
- Analog Input Return Loss: >40 dB
- Number of Serial Digital Output: 1
- Serial Digital Output Type: 270Mbps SD Serial Digital (SMPTE 259M)
- Serial Digital Output Delay: <90 ms
- Serial Digital Output Impedance: 75 ohms
- Number of Optical Output: 1
- Optical Output Type: 270Mbps SD Serial Digital (SMPTE 259M)
- Optical Output Wavelength: 1310 Nm (non-CWDM/Optional: 1550nm)
- Optical Output Power: -7 dBm
- Optical Output Fiber Types: Single Mode/Multimode
- Optical Output Connector: SC
- Analog to SDI Performance Bit Resolution: 12 bits
- Analog to SDI Performance Signal to Noise Ratio: >62 dB
- Analog to SDI Performance Frequency Response: +/-0.1dB, 0 to 2.75/5.5MHz
- Number of Reference Input: 1
- Reference Input Types: 1V P-P Composite Video, PAL or NTSC
- Reference Input Impedance: 75 ohms
- Reference Input Return Loss: >40 dB
- Relative Humidity: 0 to 95 % (Non-condensing)
BE1.pdf
538 kb
- Data Sheet
Application Note - BrightEye Control Over Ethernet
543 kb
- Other
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Ensemble Designs
Model: BE 1
Request more information from a dealer near you
close
Request more information from a dealer near you
Â