Â
Pro AV Catalog
Request Quote
All Products
HD/SD Analog to Digital Video Converter with Optical Out
Series: BrightEye
Model: BE 76
- Optical transmitter
- Use with analog HD cameras and set-top boxes
- Turn analog camera into digital HD source
- Analog component HD or SD inputs
- Analog audio inputs
Product Info
Tech Specs
Documents
This BrightEye 76 is an analog video to digital converter and audio embedder is supports standard definition component or composite or high-definition analog component video is accepted on input BNCs. Two channels of analog audio are input on a pluggable Phoenix connector. This unit is perfect for use with HD cameras or other devices with analog I/O. The digital output will carry the full, un-compressed input, synchronous to a genlock reference. Can turn a hand-held HD camera into a digital source. A three camera, live studio suddenly becomes affordable. The built-in TBC/frame synchronizer allows to feed asynchronous or noisy signals to the BrightEye 76. The input is digitized to 12 bits of resolution and time base corrected by a noise tolerant tracking circuit. An external reference input allows genlock to a house reference.
- Optical transmitter
- Use with analog HD cameras and set-top boxes
- Turn analog camera into digital HD source
- Analog component HD or SD inputs
- Analog audio inputs
- Optical embedded output
- TBC and frame sync
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- AC Voltage: 230 Volts
- DC Voltage: 12 Volts
- Peak Power: 6 Watt
- Depth: 5.50 in
- Height: 0.80 in
- Width: 5.63 in
- Product Weight: 0.94 lbs
- Warranty (Length/Type): 5 years
- Number of Analog Video Input: 1
- Analog Video Input Type: HD or SD: Y, Pr, Pb/HD or SD: Analog Component RGB, PAL or NTSC, Analog S-Video PAL or NTSC
- Analog Video Input Impedance: 75 ohms
- Number of Analog Audio Inputs: 2
- Analog Audio Input Type: Balanced
- Analog Audio Input Impedance: >15000 ohms
- Maximum Analog Audio Input Level: 24 dBu
- Number of Optical Output: 1
- Optical Output Types: SD and ASI, HD
- Optical Output Wavelength: 1310 Nm (non-CWDM)
- Optical Output Power: -7 dBm
- Optical Output Fiber Types: Single Mode/Multimode
- Optical Output Connector: SC
- Analog Video to SDI Performance Bit Resolution: 14 bits
- Analog Video to SDI Performance K Factors: >1 %
- Embedded Output Group Assign: One of four groups
- Embedded Output Group Channels: 2
- Embedded Output Group Bit Depth: 24 bits
- Supported HD Standards: 1080i/720p/1080p/1080sF
- Number of Reference Input: 1
- Reference Input Type: 1V P-P Composite Video, PAL or NTSC or Tri-level Sync
- Reference Input Impedance: 75 ohms
- Relative Humidity: 0 to 95 % (Non-condensing)
BE76.pdf
543 kb
- Data Sheet
Application Note - BrightEye Control Over Ethernet
543 kb
- Other
Application Note - Is Your IRD Messing With You?
310 kb
- Other
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Ensemble Designs
Model: BE 76
Request more information from a dealer near you
close
Request more information from a dealer near you
Â