Â
Pro AV Catalog
Request Quote
All Products
Integrated Outdoor Fiber Transmission System with Three 2408LT13 Fiber Transmitter Installed, Dual IEC320 Male Connectors
Model: 2400ODU-3T-IEC
- Minimizes length of coax run from LNB
- Convenient, time-saving pre-integrated package
- Each fiber transmitter provides a coaxial monitoring output
- Lightning protection included on RF inputs
- Weather sealed enclosure with durable powder coat finish
Product Info
Tech Specs
Documents
Accessories
The 2400ODU provides a convenient, pre-integrated package for fiber transport of Satellite and other signals within the extended L-Band range. Contained in a compact, weatherproof enclosure are up to four 2408LT fiber optic transmitters and a 2400PSU-8 power supply. This provides the needed equipment to transport up to four RF signals over individual fibers and power the connected LNBs. The 2400ODU may be conveniently mounted directly on or near the antenna structure.
- Minimizes length of coax run from LNB
- Convenient, time-saving pre-integrated package
- Each fiber transmitter provides a coaxial monitoring output
- Lightning protection included on RF inputs
- Weather sealed enclosure with durable powder coat finish
- Wide operating temperature range
- Redundant power supply
- SmartMON™ monitoring without a separate data connection
- Additional fiber transmitters are field-installable
- Knockouts provided for termination of AC power and fiber conduits
- SmartMON™ equipped 2408LT's provide remote monitoring capabilities without a separate data connection
- All modules are field replaceable and fiber transmitter modules are hot swappable
- Fiber link provides electrical isolation between antenna and facility, mitigating ground loop and lightning issues
- Fiber Optic Connector Type - Other
- Fiber Optic Signals Supported - Other
- Spec Sheet available - Yes
- Number of RF Inputs: 1-4 depending on number of installed fiber transmitters
- RF connector: F-Type (N-type optional)
- Impedance: 75ohm, 50ohm optional
- Frequency Range: 1310nm FP Laser 850MHz to 3000MHz
- Input Power Range: -10dBm to -50dBm
- LNB Power Voltage: 18VDC, 13.5VDC, off (selectable)
- LNB Power Current: 500 mA
- Protection: Short Circuit, current limited
- LO Control: 22kHz on/off (selectable)
- Number of Optical Outputs: 1-4 depending on number of installed fiber transmitters
- Optical Connector: Female
- Operating wavelength: 1310 Nm
- Output Power: +2 dBm
- Number of Inputs: Single or dual (protected) power sources can be accommodated
- Connector: Dual IEC 320 male input connectors, inside enclosure (for applications outside North America)
- Frequency: 47 to 63 Hz
- Power: 1A maximum per input
- Finish: RAL7035 textured light grey powder coat
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): -4 F
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Depth: 9 in
- Height: 16 in
- Width: 16 in
Outdoor Integrated RF Fiber Transmission System
304 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Evertz
Model: 2400ODU-3T-IEC
Request more information from a dealer near you
close
Request more information from a dealer near you
Â