Pro AV Catalog

< Back to Previous Page

Home : Fiber Optic Systems : Evertz - 3405FR-XLINK

All Products

X-LINK Fiber Optic SFP Frame

Model: 3405FR-XLINK

Dual Power supplies (primary and redundant) and conversion trays (front extractable)
Houses up to 16 front loading Evertz® SFP modules
Each slot can be used as an input or output based on SFP type
Dual primary & secondary 3405FC Frame Controllers for full VistaLINK® SNMP control and monitoring
No electrical re-cabling required when hot swapping SFP modules

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The Evertz® 3405FR-XLINK frame is the ideal solution for today's low cost, high density fiber optic distribution needs for X-LINK/fiber connectivity. All components are hot swappable through the front of the frame including SFPs, frame controllers and power converters. This ensures the unit can be fully serviceable in the field without having to be de-cabled or removed from the customer's rack. The 3405FR-XLINK is a 1RU frame designed to house up to 16 Evertz® SFP modules. This provides up to 32 EO or 32 OE in a single rack unit of space to connect X-LINK to optics, or optics back to X-LINK. The 3405FR-XLINK can be powered by external power bricks or with the 3405PS-6. The 3405PS-6 can power up to 6 x 3405FR-XLINK frames with primary & secondary power. The 3405FR-XLINK is VistaLINK® -capable with support for primary and secondary frame controller. The 3405FR-XLINK frame comes with a 3405FAN fan module and 2 x 3405PST power trays. SFPs, frame controllers and power supply modules must be ordered separately.

Dual Power supplies (primary and redundant) and conversion trays (front extractable)
Houses up to 16 front loading Evertz® SFP modules
Each slot can be used as an input or output based on SFP type
Dual primary & secondary 3405FC Frame Controllers for full VistaLINK® SNMP control and monitoring
No electrical re-cabling required when hot swapping SFP modules
Power options include external 12V power supply bricks or 1RU power supply tray which will power up to 6 x 3405FR-XLINK units with redundancy

Fiber Optic Connector Type - LC-LC
Fiber Optic Signals Supported - RS-232
Spec Sheet available - Yes

Operating Temperature (Maximum): 122 F
Operating Temperature (Minimum): 32 F
AC Voltage (Maximum): 220 Volts
AC Voltage (Minimum): 110 Volts
DC Voltage: 12 Volts
Depth: 4.16 in
Height: 1.80 in
Width: 19 in
Regulatory Compliance: CSA, EU, FCC Part 15
Density: Up to 32 EO, OE, or mixture of EO and OE to X-LINK conversion in a 1RU unit
Impedance: 75 ohm
Connector: XLINK
Serial: Single Female 9-pin D connector
Ethernet: SNMP over IEEE 802.3/U (10/100 BaseTx) RJ45 connector
Control: VistaLINK®
Number of Outputs: 2 per SFP
Rise/fall Time: < 270ps
Optical Power: -2dBm ±1dBm (Standard), -3.5dBm ±1dBm (CWDM)
Wavelength: 1310nm (Standard), 1270nm-1610nm ITU-T G.694.2 compliant (CWDM)
Number of Inputs: 2 per SFP
Operating wavelength: 1270 to 1610 Nm
Maximum Input Power: -1dBm (Standard)
Optical Sensitivity: -21dBm at 2.97Gb/s pathological Level A, -23dBm at 2.97Gb/s color bars (Standard)
Module Capacity: 16 Evertz® SFP modules. Dual TX or Dual RX

X-LINK Fiber Optic SFP Frame 116 kb - Data Sheet