Pro AV Catalog

< Back to Previous Page

Home : Fiber Optic Systems : Evertz - 3405FRS-BNC

All Products

Standalone Fiber Optic SFP BNC Frame

Model: 3405FRS-BNC

Dual Power supplies (primary and redundant)
Houses up to 4 front loading Evertz® SFP modules
Each slot can be used as an input or output based on SFP type
On board Frame Controller for full VistaLINK® SNMP control and monitoring
No electrical re-cabling required when hot swapping SFP modules

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The Evertz® 3405FRS-BNC SFP frame is the ideal solution for today's low cost, high density fiber optic distribution needs. The 3405FRS-BNC provides the flexibility to handle the high-speed requirements of 3G and HDTV as well as SD-SDI, SDTi, and DVB-ASI. The 3405FRS-BNC is designed on a standalone frame to house up to 4 hot swappable Evertz® SFP modules. This provides up to 8 EO or 8 OE in a standalone frame. The frame can be configured for a mixture of modules. The on board frame controller provides VistaLINK® capabilties for SNMP control and monitoring. The 3405FRS-BNC frame comes with a primary external power supply module. SFP's and redundant power supply must be ordered separately.

Dual Power supplies (primary and redundant)
Houses up to 4 front loading Evertz® SFP modules
Each slot can be used as an input or output based on SFP type
On board Frame Controller for full VistaLINK® SNMP control and monitoring
No electrical re-cabling required when hot swapping SFP modules

Fiber Optic Connector Type - LC-LC
Fiber Optic Signals Supported - RS-232
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
AC Voltage (Maximum): 220 Volts
AC Voltage (Minimum): 110 Volts
DC Voltage: 12 Volts
Depth: 4.13 in
Height: 1.03 in
Width: 7.08 in
Density: Up to 8 EO, OE, or mixture of EO and OE in a miniature frame
Impedance: 75 ohm
Connector: BNC per IEC 61169-8 Annex A
Serial: Single Female mini 9-pin connector
Ethernet: SNMP over IEEE 802.3/U (10/100 BaseTx) RJ45 connector
Control: VistaLINK® / SNMP
Number of Outputs: Up to 2 per SFP
Rise/fall Time: < 270ps
Optical Power: -2dBm ±1dBm (Standard), +3.5dBm ±1dBm (CWDM)
Wavelength: 1310nm (Standard & -S), 1270nm-1610nm ITU-T G.694.2 compliant (CWDM)
Number of Inputs: Up to 2 per SFP
Operating wavelength: 1270 to 1610 Nm
Maximum Input Power: -1dBm (Standard)
Optical Sensitivity: -21dBm at 2.97Gb/s pathological Level A, -23dBm at 2.97Gb/s color bars (Standard)
Max Power Consumption: 12 W
Module Capacity: 4 Evertz® SFP modules

Standalone Fiber Optic SFP BNC Frame 181 kb - Data Sheet