Â
Pro AV Catalog
Request Quote
All Products
Triple HD Electrical to Optical Converter, 19.4Mb/s to 1.485Gb/s, 1310nm FP Laser
Model: 7707EO13-3-HD
- Three independent channels of electrical to optical conversion that support all SMPTE ST 292-1 standards at 1.485Gb/s
- Supports all SMPTE ST 259 standards with operation from 143Mb/s - 360Mb/s
- Supports additional standards of SMPTE ST 305 (SDTi), SMPTE ST 310 (19.4Mb/s), SMPTE ST 344 (540Mb/s), M2S and DVB-ASI (270Mb/s)
- Automatic cable equalization to 300m @ 270Mb/s and 75m @ 1.485Gb/s with Belden 1694A (or equivalent) cable
- Fully hot swappable from front of frame, with no fiber or BNC disconnect /reconnect required
Product Info
Tech Specs
Documents
The 7707EO13-3-HD is a Triple HD Electrical to Optical Converter, 19.4Mb/s to 1.485Gb/s, 1310nm FP laser. SC/PC, ST/PC or FC/PC connector options. Tally output on Frame Status bus upon loss of input signal.
- Three independent channels of electrical to optical conversion that support all SMPTE ST 292-1 standards at 1.485Gb/s
- Supports all SMPTE ST 259 standards with operation from 143Mb/s - 360Mb/s
- Supports additional standards of SMPTE ST 305 (SDTi), SMPTE ST 310 (19.4Mb/s), SMPTE ST 344 (540Mb/s), M2S and DVB-ASI (270Mb/s)
- Automatic cable equalization to 300m @ 270Mb/s and 75m @ 1.485Gb/s with Belden 1694A (or equivalent) cable
- Fully hot swappable from front of frame, with no fiber or BNC disconnect /reconnect required
- High density - accommodates up to 45 independent channels of optical conversion, in a single 3RU frame
- Occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure
- Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK® capability
- Detection and display of input cable length
- Operation with multi-mode or single-mode fiber
- SC/PC, ST/PC or FC/PC connector options
- Tally output on Frame Status bus upon loss of input signal
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
- Spec Sheet available - Yes
- Serial Video Input Standard: SMPTE ST 292-1, SMPTE ST 259 A, B, C, D, SMPTE ST 297, SMPTE ST 305, SMPTE ST 310, SMPTE344, M2S, DVB-ASI
- Serial Video Input Number of Inputs: 3 (independent channels)
- Serial Video Input Connector: BNC per IEC 61169-8 Annex A
- Serial Video Input Equalization: Automatic to 75m @ 1.485Gb/s and 300m @ SD (270Mb/s) with Belden 1694A or equivalent cable
- Serial Video Input Return Loss: > 14dB to 1.5Gb/s
- Optical Output Number of Outputs: 3 (independent channels)
- Optical Output Connector: SC/PC, ST/PC, FC/PC female housing
- Optical Output Return Loss: > 14 dB
- Optical Output Rise/Fall Time: 270 ps
- Optical Output Wideband Jitter: < 0.2UI
- Optical Output Nominal Wavelength: 1310nm, 1550nm
- Optical Power 1310nm: -7dBm ±1dBm
- Optical Power 1550nm: 0dBm ±1dBm
- Number of Slots: 1
- Active Power: 60 Watt
- DC Voltage: 12 Volts
- Regulatory Compliance: Class 1 laser product, 24CFR 1040.10 and 1040.11, IEC 60825-1, FCC Part 15, Class A, EU EMC Directive (EMI/RFI)
Triple HD Electrical to Optical Converter
63 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Evertz
Model: 7707EO13-3-HD
Request more information from a dealer near you
close
Request more information from a dealer near you
Â