Â
Pro AV Catalog
Request Quote
All Products
HD Dual Link Video Processor
Model: 7732DVP-HD
- Automatically senses between 1080i/60, 1080i/50, 1080p/24sF, 720p/60 and 720p/50 video formats and the 1/1.001 divisor versions where applicable
- 4:4:4 Dual Link HDSDI to 4:2:2 HDSDI converter
- 4:2:2 HDSDI to 4:4:4 Dual link HDSDI converter
- 4:4:4 Dual Link HDSDI to 4:4:4 HDSDI with LUTs
- Two serial digital 1.5Gb/s HD inputs per ST 292-1
Product Info
Tech Specs
Documents
The 7732DVP-HD Dual Link Video Processor module is a multi-purpose module designed to convert between 4:2:2 and 4:4:4 HDTV video signals in a wide variety of applications. The model 7732DVP-HD can be operated in a dual link to single link mode for 4:4:4 high definition applications, or 4:2:2 to 4:4:4 mode to convert traditional high definition content to 4:4:4. The 7732DVP-HD occupies one card slot in the 3RU frame, which will hold up to 15 modules or the 1RU frame which will hold up to three modules.
- Automatically senses between 1080i/60, 1080i/50, 1080p/24sF, 720p/60 and 720p/50 video formats and the 1/1.001 divisor versions where applicable
- 4:4:4 Dual Link HDSDI to 4:2:2 HDSDI converter
- 4:2:2 HDSDI to 4:4:4 Dual link HDSDI converter
- 4:4:4 Dual Link HDSDI to 4:4:4 HDSDI with LUTs
- Two serial digital 1.5Gb/s HD inputs per ST 292-1
- Three serial digital 1.5Gb/s HD outputs per ST 292-1
- Bypass relay protection on inputs for power failures
- Retimed 4:4:4 dual link outputs
- Programmable LUTs for 4:4:4 and 4:2:2 HDSDI to accommodate different colorimetry between monitoring devices
- Factory LUTs handle logarithmic "filmstream" inputs from VIPER and ARRI D20 cameras
- Store / recall user presets of common configurations - up to 10 presets
- 6 GPI control inputs to select operating modes or load user presets
- 2 GPO status outputs indicate operating modes - programmable functions
- Card edge menu using OSD on 4:2:2 output to configure the operating modes
- Card edge LEDs for signal presence, module status
- VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7700FC VistaLINK® Frame Cont
- Processor Type - Video
- Spec Sheet available - Yes
- Serial Digital Video Input - Standard: SMPTE ST 372 (dual link 1.5Gb/s) or ST 292-1 (1.5Gb/s) - auto-detects standard using SMPTE ST 352 Payload ID SMPTE ST 274, SMPTE ST 296 - 1080i/60, 1080i/50, 1080p/24sF, 720p/60 and 720p/50 and the 1/1.001 divisor versions where applicable SMPTE 428-9, ST 2048-2 - 2048x1080p/24sF
- Serial Digital Video Input - Number of inputs: 1 dual link or 1 single link
- Serial Digital Video Input - Connector: BNC per IEC 61169-8 Annex A
- Serial Digital Video Input - Equalization: Automatic to 65m @ 1.5Gb/s with Belden 1694 or equivalent cable
- Serial Digital Video Input - Return Loss: >-15 dB up to 1.5GHz
- Serial Digital Video Output - Standard: Same as input
- Serial Digital Video Output - Number of Outputs: 2 dual link outputs (bypass relay protected to inputs) + 1 single link output
- Serial Digital Video Output - Connector: BNC per IEC 61169-8 Annex A
- Serial Digital Video Output - Signal Level: 800 mV nominal
- Serial Digital Video Output - DC Offset: 0±0.5 V
- Serial Digital Video Output - Rise and Fall Time: 200 ps nominal
- Serial Digital Video Output - Overshoot: <10% of amplitude
- Serial Digital Video Output - Return Loss - 4:4:4 Outputs: > -10dB @ 1.5Gb/s
- Serial Digital Video Output - 4:2:2 Output: > -6dB @ 1.5Gb/s
- Serial Digital Video Output - Jitter: <0.2 UI
- Serial Digital Video Output - Payload ID: SMPTE ST 352
- GPIO Control Port - Number of Inputs: 6, programmable functions
- GPIO Control Port - Number of Outputs: 2, programmable functions
- GPIO Control Port - Type: Opto-isolated, active low with internal pull-ups to +5V or +12V (jumper selectable)
- GPIO Control Port - Connector: 9-pin female D
- GPIO Control Port - Signal Level: Closure to ground
- Look Up Tables - Type: 10 bit 1-D LUT
- Look Up Tables - Number: 5 factory programmed; 5 User loadable
- Look Up Tables - User Upload: RS-232, 57600 baud using card edge connector
- Input to Output Processing Delay - Video Delay: 2 lines
- Electrical Power: 10 Watts
- Physical Number of Slots: 1
- Active Power: 12 Watt
- DC Voltage: 12 Volts
- Regulatory Compliance: Complies with FCC regulations for class A devices Complies with EU EMC directive
Video Processor
53 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Evertz
Model: 7732DVP-HD
Request more information from a dealer near you
close
Request more information from a dealer near you
Â