Pro AV Catalog
Standalone AV Gateway with USB Host Port
Model: UXP-TRS4K-2UH
- Two HDMI 2.0a inputs and outputs (software defined)
- Resolution up to 4096x2160p at 60 Hz, 4:4:4 color sampling
- USB 2.0 host port for HID and other USB devices
- Auto-discovery and simplified provisioning features
- Ultra low latency transport over 1GbE links
The UXP-TRS4K-2UH standalone AV gateway accepts up to two HDMI inputs or provides up to two HDMI outputs (software defined and dependent on network bandwidth), in addition to audio and USB. The UXP-TRS4K-2UH is a standalone device which is compact and quiet and can be installed in various in-room locations, including behind monitors, under/inside desks and lecterns, and floor boxes. In addition to two HDMI inputs or outputs, the UXP-TRS4K-2UH offers a USB host port, which can be sent at full bandwidth over your 1GbE network.
Using 1Gbps Ethernet the UXP-TRS4K-2UH encapsulates video, audio, USB 2.0, and Ethernet control data at the same time. The UXP-TRS4K-2UH supports up to two HDMI 2.0a inputs or outputs (software defined and dependent on network bandwidth) and transports them with ultra low latency over its 1GbE links.
The UXP-TRS4K-2UH is a managed element of the NUCLEUS platform which is controlled by the NUCLEUS Session Manager a full featured centralized management server used for the configuration, control, and orchestration of the UXP AV gateways. Any combination of UXP AV gateways can be interconnected using a COTS (Commercial Off The Shelf) network switch and then configured and managed by the NUCLEUS Session Manager.
- Two HDMI 2.0a inputs and outputs (software defined)
- Resolution up to 4096x2160p at 60 Hz, 4:4:4 color sampling
- USB 2.0 host port for HID and other USB devices
- Auto-discovery and simplified provisioning features
- Ultra low latency transport over 1GbE links
- Third-party control support
- Graphically rich, icon-based BYOD web-based UI
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Number of Channels: 8
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 30 Watt
- Current Draw: 5 Amps
- DC Voltage: 12 Volts
- Depth: 6.56 in
- Height: 1.81 in
- Width: 8.25 in
- Product Weight: 2 lbs
- Video Inputs: 2 HDMI 2.0a (software defined), 1 HDMI 2.0a Auxiliary to HDMI Input 2
- Video Outputs: 2 HDMI 2.0a (software defined)
- Supported Resolutions: Up to 4096x2160p at 60 Hz (4:4:4 color sampling)
- Audio Inputs: 1 stereo balanced analog (terminal header)
- Audio Input Impedance: High impedance
- Audio Input Level: Line level (+4dBu)
- Audio Outputs: 1 stereo balanced analog (terminal header), 2 S/PDIF
- Audio Output Impedance: 600 ohms
- Audio Output Level: Line level (+4dBu)
- USB: 2 HID device ports (type A), 1 host port for HID and other USB devices (micro type B)
- Ethernet Transport: 10/100/1000 BASE-T RJ45 Ethernet Port (IEEE 802.3)
- Ethernet connector: RJ45
- Transport Ports: 2 SFP/SFP+
- 1G/10G Redundancy: Yes
- Output Scaling: Yes
- HDMI Audio: LPCM (up to 8 channels), Passthrough support for Dolby Digital®/AC-3, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS-ES, DTS-HD High Res, DTS-HD Master Audio, DTS:X
- SNMP Support: Yes
- In-Band Control: Yes
- Control System: NUCLEUS Session Manager
- Third-Party Control: Yes
- Web-Based Configuration: Yes
- Relative Humidity: 10% to 90% RH (non-condensing)
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com