Â
Pro AV Catalog
Request Quote
All Products
Universal Compute Processor for 50GbE IP Systems
Model: IQUCP50
- General Features:
- Supports configuration of Ethernet links for maximum signal transport using both SFPs or for dual-link mode to provide link redundancy as per SMPTE ST 2022-7, and when operating as a receiver will dynamically adapt to any stream presented to it
- Supports unicast as well as IGMPv3 source-specific multicast, allowing point-to-point operation or transmission in multicast groups, and forward error correction with either clause 74 (Base-R) or clause 108 (RS) FEC
- Standards supported:
- 3G-SDI to SMPTE ST 424/425 level A compatible
Product Info
Tech Specs
Documents
The IQUCP50 is a user-configurable multichannel video-over-IP transceiver developed for use within low latency and high bandwidth Ethernet IP networks.Using RTP VSF TR-03 (SMPTE ST 2110), TR-04 and SMPTE ST 2022-6 encoding and encapsulation schemes, along with clause 74 FEC, enables the IQUCP50 to encode or decode up to 16 SDI signals and transport them over redundant 50GbE links (SMPTE ST 2022-7) with either dual or single port options.
- General Features:
- Supports configuration of Ethernet links for maximum signal transport using both SFPs or for dual-link mode to provide link redundancy as per SMPTE ST 2022-7, and when operating as a receiver will dynamically adapt to any stream presented to it
- Supports unicast as well as IGMPv3 source-specific multicast, allowing point-to-point operation or transmission in multicast groups, and forward error correction with either clause 74 (Base-R) or clause 108 (RS) FEC
- Standards supported:
- 3G-SDI to SMPTE ST 424/425 level A compatible
- HD-SDI to SMPTE ST 292/274/296
- SD-SDI to SMPTE ST 259-C
- 50GbE Ethernet to IEEE 802.3
- RollCall control and monitoring compatible with standard logging and reporting features
- Essence Processing (EP) features:
- Handles up to 16 SDI signals over dual 50GbE IP links (dependent on SDI signal format and compressed or uncompressed transport mode)
- Multiple transport types available for each SDI input including:
- Compressed IP transport using SMPTE ST 2042 (VC2) low- latency high-quality encoding profile
- Uncompressed video transport using either VSF TR-03 (SMPTE ST 2110) and TR-04 RTP, or SMPTE ST 2022-6 encapsulation
- PCM audio using TR-03 and AES67
- SMPTE ST 2110-40 metadata support via IETF standard “RTP Payload for Ancillary Data”
- Supports frame-synchronized SDI inputs and outputs, with audio rate adaption, referenced to either IEEE-1588v2 (PTP) network timing (compliant with SMPTE ST 2059-2) or via the IQH3B frame analog reference bus for blackburst/tri-level syncs
- Includes UHD quad link mode for 3G SQD or 2SI signal transport
- Low delay mode and independent H and V offset available for each channel along with up to two frames of video delay, and up to 255ms of audio delay
- Signal Monitoring (SM) features:
- 12x4 multiviewer capability with signal monitoring licens
- Spec Sheet available - Yes
- Wireless: No
Ethernet
569224 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Grass Valley, Inc.
Model: IQUCP50
Request more information from a dealer near you
close
Request more information from a dealer near you
Â