Â
Pro AV Catalog
Request
More Information
RDL Introduces EZ-MCP1 Microphone Compressor
Posted on Monday, June 14, 2010

- Solve Level Variations Due to Inconsistent Mic Technique
- Avoid Overloads from Loud/Excited Speech or Mic Proximity
- Prevent Clipping Distortion at Mic Level Prior to Mixer
- Provide Consistent Mic Level for Maximum Intelligibility
- Economical for Installation on Every PA Microphone
- Lightweight Enough for Traveling Presenters
- A Must for Every Existing and New PA/Paging System
The EZ-MCP1 is an in-line microphone compressor that produces consistent audio levels despite wide variations (up to 30 dB) from the microphone. It is installed between a dynamic or condenser microphone and a mic-level mixer or amplifier input. The only setup required is a front-panel level trimmer that is adjusted during normal speech until the compression LED just begins to flash. A rear-panel output level trimmer is provided although it is typically left in the normal default position. Phantom voltage (24 V) is automatically switched on when the EZ-MCP1 output is connected to a mic jack that provides phantom voltage. The EZ-MCP1 improves sound quality and intelligibility by producing consistent audio levels and controlling overloads that produce distortion and clipping. It is used for recording, paging and public address in houses of worship, restaurants, clubs, meeting rooms, educational facilities, conference rooms and commercial sound systems.
Related Products
Model: EZ-MCP1
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Request more information from a dealer near you
close
Request more information from a dealer near you
Â