Pro AV Catalog

< Back to Previous Page

Home : Signal Routing / Switching : RDL, Radio Design Labs - EZ-HSX4

All Products

Stereo Audio Input Switcher with Headphone Amp - 4X1

Series:

Model: EZ-HSX4

Four Input Source Selection
Unbalanced Stereo Audio Inputs and Output
Inputs and Line Output on Rear-Panel RCA Jacks
Line Output Switchable Fixed (Unity Gain) or Variable
Variable Output Follows Front-Panel Level Control

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Accessories

The EZ-HSX4 is a stereo audio source selector with an output volume control. Line-level and headphone outputs are provided. This unit is ideal as a four input headphone amplifier and as a source selector feeding an associated audio amplifier. The EZ-HSX4 is used in stores, houses of worship, studios, sound booths, home component systems and commercial sound systems.

Four Input Source Selection
Unbalanced Stereo Audio Inputs and Output
Inputs and Line Output on Rear-Panel RCA Jacks
Line Output Switchable Fixed (Unity Gain) or Variable
Variable Output Follows Front-Panel Level Control
Headphone Output on 1/4" (6.3 mm) and MINI Jacks
Headphone Output Follows Front-Panel Level Control
Full-Size Interlocking Pushbuttons on Front Panel
Easy-to-Push Large Buttons
Solid-State Audio Switching
Switch Noise Cannot Affect Signal Quality

Switcher Type - Audio
Switcher Audio Signal Type Supported - Unbalanced
Switcher Audio Input Signal Type - Stereo Audio
Switcher Connector Type - RCA

Inputs (4):: Stereo on dual RCA jacks, > 10 kΩ, -10 dBV nominal, +10 dBV max.
Level control:: Off to +12 dB gain
Outputs (3):: Stereo on dual RCA jacks (line level, -10 dBV nominal, +10 dBV max. fixed, +17 dBV max. variable), 1/4” (6.3 mm) TRS or Mini jack (2 headphone, 35 mW, 100 Ω load)
Frequency Response: 10 Hz to 20 kHz (line output ±0.05 dB, headphone output ±1.25 dB, 100 Ω load)
THD+N:: < 0.03% (line output), < 0.1% (headphone output, 10 mW, 100 Ω load)
Crosstalk:: < -70 dB (1 kHz)
Noise:: < -100 dB (headphone, below 10 mW output, 100 Ω load)
Noise:: < -80 dB (variable output, below -10 dBV, unity gain), < -95 dB (fixed output, below -10 dBV)
24 Vdc power supply current:: 40 mA (idle), 50 mA (max.)
Case dimensions:: 5.75” (14.6 cm)W x 5” (12.7 cm)D
Mounting size:: 1/3 rack width
Crosstalk: -70 dB
Total Harmonic Distortion + Noise (THD+N): 0.03 %
Depth: 5 in
Width: 5.75 in
Shipping Weight: 1.20 lbs

EZ-HSX4_INSTALLATION_MANUAL.pdf 675 kb - Instructions

EZ-CC6
Component Chassis for 6 Increments of 1/6 Rack Width

EZ-DC2
Desktop Chassis for 1/3 Rack Width EZ Products

EZ-FP1
Filler Panel - 1/6 Rack Width for EZ-RA6 or EZ-CC6

EZ-RA6
Rack Adapter for 6 Increments of 1/6 Rack Width

EZ-SD1
Storage Drawer-1/6 Rack Width for EZ-RA6 or EZ-CC6

EZ-SD2
Storage Drawer - 1/3 Rack Width for EZ-RA6 or EZ-CC6

EZ-SMB2
Surface Mount Bezel for 1/3 Rack Width EZ Products

EZ-UCB2
Under Counter Bracket Pair for all EZ Product Widths