Pro AV Catalog

< Back to Previous Page

Home : Signal Processing Systems : RDL, Radio Design Labs - EZ-MPA1

All Products

Microphone Preamplifier - Stereo Output with Compressors

Series:

Model: EZ-MPA1

Balanced Microphone Input on Rear-Panel XLR
Switch-Selectable Phantom on Rear Panel
Unbalanced Output on MINI or RCA Rear-Panel Jacks
Preamp Feeds Left and Right Output Channels
Front-Panel Compressor Enable/Disable Switch

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Accessories

The EZ-MPA1 is a microphone preamplifier with front-panel volume control and audio level metering. A front-panel switch engages an audio compressor to control overloads and clipping during high level audio bursts or peaks from the microphone. Dynamic or condenser microphones are both supported with rear-panel switchable phantom voltage. The preamplified mic signal feeds both channels of the line output on RCA or MINI jacks. LED VU metering facilitates easy level adjustment. The EZ-MPA1 is ideal to add microphone inputs to mixers and amplifiers with line inputs. It is used in houses of worship, restaurants, clubs, meeting rooms, educational facilities, conference rooms, studios and commercial sound systems.

Balanced Microphone Input on Rear-Panel XLR
Switch-Selectable Phantom on Rear Panel
Unbalanced Output on MINI or RCA Rear-Panel Jacks
Preamp Feeds Left and Right Output Channels
Front-Panel Compressor Enable/Disable Switch
Audio Compressor Controls Overloads
Front-Panel LEVEL Control
Dual-LED VU Meter
Optimized for Dynamic or Condenser Mics
Headroom Accomodates High Input Levels
Headroom Increases with Lower Gain Settings
Compressor Limits Clipping Over Wide Dynamic Range

Preamplifier Signal Type - Audio

input:: 1.2 kΩ balanced on XLR jack, mic-level, -11 dBu max.
Level control:: Off to 50 dB gain
Outputs (2):: -10 dBV nominal on RCA jacks or Mini jack, +16 dBV max. without compression, -4 dBV max. with 20 dB compression
Frequency Response: 80 Hz to 40 kHz (±1 dB, mic input, -6 dB at 20 Hz with integral high-pass filter)
THD+N:: < 0.1% (35 Hz to 20 kHz, -50 dBu input)
Compression:: 20 dB range, switch-selectable
CMRR:: > 55 dB (20 to 20 kHz)
Metering:: Dual-LED VU Meter, calibrated to -10 dBV output
Phantom:: Switch-selectable 24 V (IEC 1938: 1996-12)
Noise:: < -65 dB (below -10 dBV output, -50 dBu input)
24 Vdc power supply current:: 55 mA (idle), 80 mA (max.), 100 mA (max. with phantom)
Case dimensions:: 5.75” (14.6 cm)W x 3” (7.6 cm)D
Mounting size:: 1/3 rack width
DC Voltage: 24 Volts
Depth: 3 in
Width: 5.75 in
Noise: -65 dBA
Shipping Weight: 1.60 lbs

EZ-MPA1_INSTALLATION_MANUAL.pdf 700 kb - Instructions

EZ-CC6
Component Chassis for 6 Increments of 1/6 Rack Width

EZ-DC2
Desktop Chassis for 1/3 Rack Width EZ Products

EZ-FP1
Filler Panel - 1/6 Rack Width for EZ-RA6 or EZ-CC6

EZ-RA6
Rack Adapter for 6 Increments of 1/6 Rack Width

EZ-SD1
Storage Drawer-1/6 Rack Width for EZ-RA6 or EZ-CC6

EZ-SD2
Storage Drawer - 1/3 Rack Width for EZ-RA6 or EZ-CC6

EZ-SMB2
Surface Mount Bezel for 1/3 Rack Width EZ Products

EZ-UCB2
Under Counter Bracket Pair for all EZ Product Widths