Pro AV Catalog

< Back to Previous Page

Home : Audio Production Equipment : RDL, Radio Design Labs - EZ-PA20

All Products

20 Watt Stereo Audio Power Amplifier

Series:

Model: EZ-PA20

Audio Amplifier with Front-Panel Level Control
10 Watts RMS Per Channel into 8 Ω
8 Watts RMS Per Channel into 4 Ω
Switch-Selectable Load Impedance on Rear Panel
Unbalanced Line Input on RCA Jacks

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Accessories

The EZ-PA20 is a stereo audio amplifier with one line input and a front-panel volume control. An integral compressor/limiter allows a higher sound output level without clipping than is possible using a standard amplifier. The output drives 4 or 8 ohm speakers. The EZ-PA20 is used in houses of worship, restaurants, clubs, meeting rooms, educational facilities, conference rooms and commercial sound systems.

Audio Amplifier with Front-Panel Level Control
10 Watts RMS Per Channel into 8 Ω
8 Watts RMS Per Channel into 4 Ω
Switch-Selectable Load Impedance on Rear Panel
Unbalanced Line Input on RCA Jacks
Switch-Selectable Mono or Stereo Mode
Integral Overload Limiter with LED Indicator
Limiter Controls Overloads from Clipping
Limiter Produces Output Level Comparable to Higher Power Amps
Mono Mode Switch Sums Left and Right Inputs

Amplifier Signal Type - Audio
Amplifier Type - Power Amplifier

input:: > 10 kΩ, -10 dBV nominal on RCA jacks, -13 dBV Min. (for 10 W out), +22 dBV max.
Gain:: Off to 32 dB
Outputs (2):: Left and Right, 10 Watts RMS into 8 Ω per channel or 8 Watts RMS into 4 Ω per channel, switchΩselectable output impedance
Frequency Response: 35 Hz to 20 kHz (±1.5 dB, 10 Watts)
THD+N:: < 0.25%
Crosstalk:: < -68 dB (1 kHz)
Noise:: < -70 dB (below 10 Watts)
24 Vdc power supply current:: 160 mA (idle), 1000 mA (max.)
Case dimensions:: 5.75” (14.6 cm)W
Total Harmonic Distortion + Noise (THD+N): 0.25 %
DC Voltage: 24 Volts
Depth: 5 in
Width: 5.75 in
Shipping Weight: 1.35 lbs

EZ-PA20_INSTALLATION_MANUAL.pdf 746 kb - Instructions

EZ-CC6
Component Chassis for 6 Increments of 1/6 Rack Width

EZ-DC2
Desktop Chassis for 1/3 Rack Width EZ Products

EZ-FP1
Filler Panel - 1/6 Rack Width for EZ-RA6 or EZ-CC6

EZ-RA6
Rack Adapter for 6 Increments of 1/6 Rack Width

EZ-SD1
Storage Drawer-1/6 Rack Width for EZ-RA6 or EZ-CC6

EZ-SD2
Storage Drawer - 1/3 Rack Width for EZ-RA6 or EZ-CC6

EZ-SMB2
Surface Mount Bezel for 1/3 Rack Width EZ Products

EZ-UCB2
Under Counter Bracket Pair for all EZ Product Widths