Â
Pro AV Catalog

Request Quote
All Products
Stereo Phono Preamplifier
Series:
Model: EZ-PH1
- Phono Input on Gold-Plated RCA Jacks
- Line Output on Gold-Plated RCA Jacks
- Front-Panel GAIN Trimmer for Each Channel
- Dual-LED VU Meter for Each Channel
- RIAA Equalization
Product Info
Tech Specs
Documents
Accessories
The EZ-PH1 is a stereo phono preamplifier with front-panel volume trimmers and audio level metering. Stereo RCA jacks and a grounding screw are provided on the rear panel for connecting a turntable tone arm. The input is preamplified with RIAA equalization to feed the line output RCA jacks. Left and right channel front-panel LED VU metering facilitates adjustment of the level trimmers. The EZ-MPA1 is ideal to add phono inputs to mixers and amplifiers with line inputs, or for direct connection to recording decks for dubbing records onto other media. It is used in clubs, educational facilities and studios.
- Phono Input on Gold-Plated RCA Jacks
- Line Output on Gold-Plated RCA Jacks
- Front-Panel GAIN Trimmer for Each Channel
- Dual-LED VU Meter for Each Channel
- RIAA Equalization
- Turntable Grounding Screw Provided
- Gold-Plated Connectors
- Adapt Turntable to an Amplifier Line Input
- Feed a Turntable into a CD Recorder
- Preamplifier Signal Type - Audio
- input:: 47 kΩ on stereo RCA jacks
- Input Level:: -18 dBV max.
- Gain:: OFF to +55 dB (1 kHz)
- OUTPUT:: -10 dBV nominal on stereo RCA jacks
- Equalization:: RIAA
- Frequency Response: 20 to 20 kHz (±0.75 dB referred to RIAA curve)
- Crosstalk:: < -75 dB (1 kHz)
- Metering:: Dual-LED VU Meter for Left and Right, calibrated to -10 dBV output
- THD+N:: < 0.05% (20 to 20 kHz, 36 dB gain)
- Noise:: < -74 dB (36 dB gain, 1 kHz), < -80 dB (36 dB gain, 1 kHz, “A-weighted”)
- 24 Vdc power supply current:: 30 mA (idle), 45 mA (max.)
- Case dimensions:: 2.9” (7.4 cm)W x 3” (7.6 cm)D
- Mounting size:: 1/6 rack width
- Input Impedance: 4700 ohm
- DC Voltage: 24 Volts
- Depth: 3 in
- Width: 2.90 in
- Shipping Weight: 0.80 lbs
EZ-PH1_INSTALLATION_MANUAL.pdf
582 kb
- Instructions
EZ-CC6
Component Chassis for 6 Increments of 1/6 Rack Width
EZ-DC1
Desktop Chassis for 1/6 Rack Width for EZ Products
EZ-FP1
Filler Panel - 1/6 Rack Width for EZ-RA6 or EZ-CC6
EZ-RA6
Rack Adapter for 6 Increments of 1/6 Rack Width
EZ-SD1
Storage Drawer-1/6 Rack Width for EZ-RA6 or EZ-CC6
EZ-SD2
Storage Drawer - 1/3 Rack Width for EZ-RA6 or EZ-CC6
EZ-SMB2
Surface Mount Bezel for 1/3 Rack Width EZ Products
EZ-UCB2
Under Counter Bracket Pair for all EZ Product Widths
Component Chassis for 6 Increments of 1/6 Rack Width
EZ-DC1
Desktop Chassis for 1/6 Rack Width for EZ Products
EZ-FP1
Filler Panel - 1/6 Rack Width for EZ-RA6 or EZ-CC6
EZ-RA6
Rack Adapter for 6 Increments of 1/6 Rack Width
EZ-SD1
Storage Drawer-1/6 Rack Width for EZ-RA6 or EZ-CC6
EZ-SD2
Storage Drawer - 1/3 Rack Width for EZ-RA6 or EZ-CC6
EZ-SMB2
Surface Mount Bezel for 1/3 Rack Width EZ Products
EZ-UCB2
Under Counter Bracket Pair for all EZ Product Widths
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close

Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Radio Design Labs
Model: EZ-PH1
Request more information from a dealer near you
close
Request more information from a dealer near you
Â