Â
Pro AV Catalog
Request Quote
All Products
Unbalanced to Balanced Converter - 2 Channel
Series:
Model: FP-UBC2
- Stereo Unbalanced to Balanced Audio Conversion
- Connectorized Audio Converter
- Output Level Trim
- Low-Noise and Low-Distortion Conversion
- Cabinet, Shelf or Rack Mounting
Product Info
Tech Specs
Documents
Accessories
The FP-UBC2 is the ideal choice for connectorized conversion from unbalanced to balanced audio. This module features two identical channels. Gold-plated phono jacks are utilized for each unbalanced input channel. Each output is balanced, connected through an XLR jack. A gain trim potentiometer is provided for each channel. The normal gain setting is indicated for the trimming potentiometer. This setting produces a +4 dBu balanced output for a -10 dBV unbalanced input. The gain is adjustable -5 dB to +10 dB from the normal gain. Therefore, a +4 dBu output signal is possible from input signals ranging from -20 dBV to -5 dBV.
- Stereo Unbalanced to Balanced Audio Conversion
- Connectorized Audio Converter
- Output Level Trim
- Low-Noise and Low-Distortion Conversion
- Cabinet, Shelf or Rack Mounting
- Convenience of RDL FLAT-PAKs
- Converter Signal Types - Audio
- Converter Type - Other
- Noise: < -85 dB referred to +4 dBu (20 Hz to 20 kHz)
- Height: 1.29 in. 3.28 cm
- Width: 3.25 in. 8.26 cm
- Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): 32 F
- Maximum Frequency Response (Bandwidth): 40 kHz
- Maximum Frequency Response (Bandwidth): 40000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Depth: 4.07 in
- Height: 1.29 in
- Width: 3.25 in
- Shipping Weight: 0.70 lbs
- Amps per FP-UBC2: 2 identical circuits (stereo or dual mono operation)
- Gain: -5 dB to +10 dB (adjustable relative to +4 dBu output for –10 dBV input); (separate controls for each channel)
- Input Level: -20 dBV to -5 dBV (for +4 dBu output)
- Input Impedance: 10 k Ohms
- Input Configuration: Unbalanced
- Output Impedance: 150 Ohms balanced, drives 600 Ohms or 10 k Ohms lines
- Output Configuration: Balanced or unbalanced
- IMD: < 0.02%
- Output Level: +4 dBu
- Headroom: > 18 dB (at rated output level of +4 dBu)
- Noise: < -85 dB referred to +4 dBu (20 Hz to 20 kHz)
- Crosstalk: Better than 70 dB (20 Hz to 20 kHz); < -80 dB (typ. 1 kHz)
- Power Requirement: GROUND-REFERENCED, 24 Vdc @ 50 mA
Datasheet for Unbalanced to Balanced Converter - 2 Channel
200695 kb
- Other
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Radio Design Labs
Model: FP-UBC2
Request more information from a dealer near you
close
Request more information from a dealer near you
Â