Pro AV Catalog
Bidirectional Unbalanced Stereo Audio Network Interface
Model: SF-BNC2
- Dante network interface for two audio inputs and two audio outputs
- Inputs and outputs on front-panel RCA jacks and stereo 3.5mm mini-jacks
- Selectable Dante sample rates - 44.1kHz, 48kHz, 88.2kHz and 96kHz
- Converts two unbalanced line-level audio sources to Dante network channels
- Converts two Dante network audio signals to unbalanced line level
The SF-BNC2 is a bidirectional Dante audio network interface. It features two unbalanced audio inputs (left and right) on RCA or stereo 3.5mm Mini-jack connectors, as well as two unbalanced audio outputs (left and right) on RCA and stereo 3.5mm Mini-jack connectors. Special software is not required to configure the SF-BNC2. Each input provides a network digital audio level of -20dBFS for an unbalanced -10dBV input. Each output provides -10dBV unbalanced for a network digital audio level of -20dBFS. The SF-BNC2 is a professional grade product for studio quality fidelity and low noise performance.
The SF-BNC2 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.
The SF-BNC2 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems.
- Dante network interface for two audio inputs and two audio outputs
- Inputs and outputs on front-panel RCA jacks and stereo 3.5mm mini-jacks
- Selectable Dante sample rates - 44.1kHz, 48kHz, 88.2kHz and 96kHz
- Converts two unbalanced line-level audio sources to Dante network channels
- Converts two Dante network audio signals to unbalanced line level
- Special software not required for module setup
- Exceptional low-noise and low-distortion performance
- High resolution 24 bit digital to analog conversion
- Legendary RDL analog filtering enhances superb audio performance
- LED indicator for valid power and network sync
- Operation from PoE power (Class 0, IEEE 802.3af)
- Equipped for SysFlex™ rack mounting or surface mounting
- Dante Enabled - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Depth: 5.77 in
- Height: 1.68 in
- Width: 2.79 in
- Product Weight: 0.91 lbs
- Shipping Weight: 1.12 lbs
- Specification:
•Network Connector: RJ45 with Link and Speed indicators
•Digital Audio Ethernet Protocol: Dante
•Transmission Rate: 100Mbps
•Sample Rates Supported: 44.1kHz, 48kHz (default), 88.2kHz, 96kHz
•Bit Depth Supported: 24 bits
•Audio Operating Level: -20dBFS = -10dBV
•Reference Level: 0dBFS = +10dBV - Line Inputs to Network Interface:
•Inputs (4): Mini-jack Stereo or RCA jacks (2, L and R)
•Input Level (for +4dBu/-20dBFS): -10dBV nominal
•Input Level (maximum): +10dBV
•Input Impedance: > 15 k-ohm
•Frequency Response: 20Hz to 20kHz (± 0.5dB)
•Noise below -20dBFS (20 to 20kHz): < -80dB
•Crosstalk: < -85dB (L into R, R into L, 20Hz to 20kHz)
•THD+N: < 0.05% (20Hz to 20kHz, -20dBFS); 0.02% at 1kHz (typ)
•Headroom: 20dB - Network to Line Outputs:
•Outputs (4): Mini-jack Stereo or RCA jacks (2, L and R)
•Output Level (operating): -10dBV nominal
•Output Level (maximum): +10dBV
•Output Impedance: 40-ohm
•Frequency Response: 20Hz to 20kHz (+/- 0.5dB)
•THD+N: < 0.1%
•Noise: < -75dB (below -10dBV)
•Crosstalk: < -70dB (20Hz to 20kHz)
•Headroom above -10dBV: 20dB - Indicators :
•Ethernet Link and Speed (2, rear panel); Sync (front panel)
•Power Requirement: PoE Class 0, IEEE 802.3af
•Specification Conditions: Gain/Level: ± 1dB; Source termination: 150-ohm, A to d values measured in digital domain
•Package Type: Cardboard Box
•Package dimensions: 7 x 4.375 x 2.25 in
•Tariff code: 8517.18.0050
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com