Pro AV Catalog
Network to Stereo Headphone Amplifier
Model: SF-NH1
- Converts two Dante network audio signals to a stereo headphone
- Output on professional quality 3.5 mm stereo MINI Jack
- Selectable Dante sample rates - 44.1kHz, 48kHz, 88.2kHz, 96kHz
- Front-panel output level control
- Special software not required for module setup
The SF-NH1 is a headphone amplifier that converts two Dante network audio channels to a stereo headphone output with front-panel level adjustment. The output connects through a stereo 3.5 mm Mini-jack. Each channel provides 100 mW into 100 ohms for a network digital audio level of 0 dBFS. Special software is not required to configure the module. The SF-NH1 is a professional grade product for studio quality fidelity and low noise performance.
The SF-NH1 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.
The SF-NH1 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems.
- Converts two Dante network audio signals to a stereo headphone
- Output on professional quality 3.5 mm stereo MINI Jack
- Selectable Dante sample rates - 44.1kHz, 48kHz, 88.2kHz, 96kHz
- Front-panel output level control
- Special software not required for module setup
- Exceptional low-noise and low-distortion performance
- High resolution 24 bit digital to analog conversion
- Legendary RDL analog filtering enhances superb audio performance
- LED Indicator for valid power and network sync
- Operation from PoE power (Class 0, IEEE 802.3af)
- Equipped for SysFlex™ rack mounting or surface mounting
- Amplifier Type - Headphone Amplifier
- Dante Enabled - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Depth: 5.77 in
- Height: 1.68 in
- Width: 2.79 in
- Product Weight: 0.88 lbs
- Shipping Weight: 1.09 lbs
- Noise: < -75dB (below -20dBFS), < -95 (below 0dBFS)
- Network Connector: RJ45 with Link and Speed indicators
- Digital Audio Ethernet Protocol: Dante
- Transmission Rate: 100 Mbps
- Sample Rates supported: 44.1, 48 (default), 88.2 and 96 kHz
- Bit Depth Supported: 24 bits
- Reference Level: 0dBFS = 150mW into 100-ohm
- Outputs (2): Mini-jack Stereo (L and R)
- Output Level (maximum): 0dBFS = 150mW into 100-ohm
- Output Impedance: < 50 ohm
- Frequency Response: 20Hz to 20kHz (+/- 0.5dB)
- THD+N: < 0.05% (20Hz to 20kHz, -20 dBFS), 0.015% at 1kHz (typ)
- Crosstalk: < -80dB (1kHz, -20dBFS)
- Headroom above -20dBFS: 20dB
- Indicators (3): Ethernet Link and Speed (2, rear panel), Sync (front panel)
- Power Requirement: PoE Class 0, IEEE 802.3af
- Specification Conditions: Gain/Level +/- 1dB
- Package Type: Cardboard Box
- Package dimensions: 7 x 4.375 x 2.25 inch
- Tariff code: 8517.18.0050
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com