Â
Pro AV Catalog

Request Quote
All Products
Dual Bal/Unbal Line Amp: -12 to 20 dB Gain
Series:
Model: STA-1
- Up to 20 dB Gain in an Audio Line
- Conversion from Balanced to Unbalanced
- Conversion from Unbalanced to Balanced
- Conversion from High to Low Impedance
- Conversion from Low to High Impedance
Product Info
Tech Specs
Documents
Accessories
The STA-1 is a dual-channel line-level preamplifier with bridging inputs, adjustable gain or loss, and low-impedance outputs. Each of the two identical circuits is both an electronic line transformer and a line amplifier. Hook up the STA-1 just like a pair of audio transformers with gain. True dc amplifiers produce unsurpassed audio clarity, high common-mode rejection, ultra-low distortion and low noise. The STA-1 is perfect for most line amplification, impedance or balanced/unbalanced conversion.The STA-1 operates from floating or bipolar dc power. For installations where ground-referenced power is preferred, use the STA-2A Dual High Gain Line Amplifiers.
- Up to 20 dB Gain in an Audio Line
- Conversion from Balanced to Unbalanced
- Conversion from Unbalanced to Balanced
- Conversion from High to Low Impedance
- Conversion from Low to High Impedance
- Bridge an Audio Line Feed
- Precisely Match Audio Levels
- Amplifier Signal Type - Audio
- Amplifier Type - Other
- Spec Sheet available - Yes
- Amps per STA-1: 2 identical circuits (stereo or dual mono operation)
- Gain: 20 dB (adjustable, separate controls for each channel)
- Input Impedance: 10 k Ohms bridging
- Input Configuration: Balanced or unbalanced
- Output Impedance: 200 Ohms balanced (drives 600 Ohms or 10 k Ohms lines)
- Output Configuration: Balanced or unbalanced
- Frequency Response: dc to 25 kHz (+/- 0.25 dB)
- THD+N: 0.003% to 0.009%; (0.005% nominal)
- Output Level: +4 dBu
- Headroom: 18 dB (at rated output of +4 dBu)
- Noise: -80 to -85 dB (referred to +4 dBu); -98 to -103 dB (referred to +22 dBu)
- CMRR: -70 dB to -80 dB (100 Hz)
- Crosstalk: Better than 75 dB
- Power Requirement: FLOATING, 24 to 33 Vdc @ 50 mA
- Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): 32 F
- Maximum Frequency Response (Bandwidth): 25 kHz
- Maximum Frequency Response (Bandwidth): 25000 Hz
- Impedance: 200 ohm
- Total Harmonic Distortion + Noise (THD+N): 0.01 %
- Shipping Weight: 0.20 lbs
- Color: Black
Lne amplifier
640 kb
- Data Sheet
DRA-35S
STICK-ON DIN Rail Adapter
DRA-35S6
STICK-ON DIN Rail Adapter
DTB
STICK-ON® Series Detachable Terminal Block
MB-1
Mounting Kit - RU, ST and TX Series
SMK-12
STICK-ON Mounting Plate
SR-10
STICK-ON Series Mounting Rack - 10 Modules
SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules
SR-4
STICK-ON Series Mounting Rack - 7 Modules max.
STR-19A
STICK-ON Series Racking System - 12 Modules
ST-RRB1
Rear rack rail mounting kit for any STICK-ON module
STR-19B
Hinged 19-inch Rack Mount Panel
STICK-ON DIN Rail Adapter
DRA-35S6
STICK-ON DIN Rail Adapter
DTB
STICK-ON® Series Detachable Terminal Block
MB-1
Mounting Kit - RU, ST and TX Series
SMK-12
STICK-ON Mounting Plate
SR-10
STICK-ON Series Mounting Rack - 10 Modules
SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules
SR-4
STICK-ON Series Mounting Rack - 7 Modules max.
STR-19A
STICK-ON Series Racking System - 12 Modules
ST-RRB1
Rear rack rail mounting kit for any STICK-ON module
STR-19B
Hinged 19-inch Rack Mount Panel
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close

Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Radio Design Labs
Model: STA-1
Request more information from a dealer near you
close
Request more information from a dealer near you
Â