Â
Pro AV Catalog
Request Quote
All Products
4-channel openGear Analog Composite to SDI Converter
Model: ADC-8732B-C (-SC)
- 7.8W power
- Freeze modes
- Proc amp controls
- 12-bit A to D conversion
- 10-bit decoding with 3-line/5-line/3D adaptive comb filters
Product Info
Tech Specs
Documents
The ADC-8732B-C (-SC) is 10-bit broadcast quality video decoder with 12-bit analog to digital converter supporting 4 channels of analog audio embedding. It is specifically designed for broadcast or production situations in which an analog PAL-B, PAL-M, PAL-N, or NTSC composite signal must be converted to a component SD SDI signal. 4 SD SDI outputs with embedded audio are provided. Analog audio is converted at 24-bit resolution and offers adjustable ±10dBu of gain and delay up to 5 seconds.
- 7.8W power
- Freeze modes
- Proc amp controls
- 12-bit A to D conversion
- 10-bit decoding with 3-line/5-line/3D adaptive comb filters
- 4 channels of analog audio A/D with embedding
- Optional frame synchronization
- Horizontal and vertical timing adjustments
- Programmable vertical interval blanking
- 24-bit audio ADC resolution, adjustable gain and delay
- Status indicator LEDs on card-edge
- Choice of reference inputs
- 5-year transferable warranty
- Converter Signal Types - Video
- Converter Type - Analog to Digital Converter
- Warranty - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 41 F
- Input Signal Types: Analog Composite
- Number of Channels: 4
- Output (Converted) Signal Type: SDI
- Active Power: 7.80 Watt
- Regulatory Compliance: FCC
- Warranty (Length/Type): 5 Years
- Signal Standards Accepted: NTSC, PAL-B, PAL-M, PAL-N
- Number of Composite Video Inputs: 1
- Composite Video: 1 Vp-p (Nominal)
- Composite Video Input Impedance: 75 ohm s (terminating)
- Composite Video Return Loss: >50dB to 6.75MHz
- Composite Video Common Mode Rejection: >58 dB (50/60Hz)
- Signal Standards: SMPTE 259M-C, 270Mbps 525/625 lines, 10 bits
- Number of Component SDI Outputs: Full Rear Module: 7, Split Rear Module: 3
- Component SDI Output Return Loss: >20dB to 270MHz
- Component SDI Output Signal Level: 800mV ±10 %
Converter
1976 kb
- Other
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Ross Video
Model: ADC-8732B-C (-SC)
Request more information from a dealer near you
close
Request more information from a dealer near you
Â