Â
Pro AV Catalog
Request Quote
All Products
openGear Analog Component to SDI Video Converter
Model: ADC-8733A (-S)
- YUV input from Betacam, MII and SMPTE/EBU formats
- All RGB input formats supported
- Field-upgradeable frame synchronization option available
- Programmable vertical interval blanking and signal pass-through
- Extensive proc amp controls, pass or clip super black
Product Info
Tech Specs
Documents
The ADC-8733A (-S) is perfect solution for converting analog component (YUV/RGB) sources such as VTRs, cameras and character generators for use in digital realm. Component YUV/RGB video signal, with or without setup, is converted to 4 SD SDI (SMPTE 259M) outputs employing 2x oversampled 12-bit A to D conversion and high quality digital filtering to ensure superb frequency response. The ADC-8733A comes standard with built-in line delay and line synchronizer as well as advanced proc amp controls. The ADC-8733A-S version comes with frame synchronizer and frame delay modes, capable of synchronizing incoming video to house reference. Various timing modes are available to accommodate most situations. New techniques in frame synchronization contribute to low power requirements and compact design.
- YUV input from Betacam, MII and SMPTE/EBU formats
- All RGB input formats supported
- Field-upgradeable frame synchronization option available
- Programmable vertical interval blanking and signal pass-through
- Extensive proc amp controls, pass or clip super black
- Freeze modes, horizontal and vertical timing adjustments
- Tracking delay output for companion audio synchronizer
- Built-in test signals (FF color bars, SDI checkfield)
- 5-year transferable warranty
- Converter Signal Types - Video
- Converter Type - Analog to Digital Converter
- Warranty - Yes
- Input Signal Types: Analog Component
- Number of Channels: 4
- Output (Converted) Signal Type: SDI
- Regulatory Compliance: FCC
- Warranty (Length/Type): 5 Years
- Active Power: 9.50 Watt
- Component Video Signal Standards Accepted: YUV (SMPTE, BETA, and MII)RGB (SMPTE, NTSC-Rel, MII)
- Number of Component Video Inputs: 1
- Component Video Input: 1 V p-p (nominal)
- Component Video Input Impedance: 75 ohm (terminating)
- Component Video Input Return Loss: >43.5dB to 6MHz
- SDI output Signal Standards: SMPTE 259M-C, 270Mbps 525/625-lines, 10 bits
- Number of SDI Outputs: Full Rear Module: 4
- SDI Output Signal Level: 800mV ±10%
- SDI Output DC Offset: <50mV
- SDI Output Rise and Fall Time: >800 ps (20-80%, ±15%)
- SDI Output Overshoot: <5 % (typical)
Converter
2455 kb
- Other
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Ross Video
Model: ADC-8733A (-S)
Request more information from a dealer near you
close
Request more information from a dealer near you
Â