Pro AV Catalog

< Back to Previous Page

Home : Signal Processing Systems : Ross Video - CMA-9011 (-R)

All Products

SDI Component Monitoring Amplifier with 4 Reclocked Outputs

Model: CMA-9011 (-R)

Part #: 9011RDR-004-04

NTSC, PAL, or PAL-N operation
10-bit DAC resolution
8-bit data processing
Four reclocked SDI outputs
Reclocking to reduce jitter and noise

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The CMA-9011 SDI component monitoring amplifier is a high quality monitoring solution for SDI signals. The CMA-9011-R offers 4 reclocked SDI outputs in addition to 2 analog composite video outputs. The CMA-9011 (-R) addresses high-quality imaging requirements by converting the 8 MSb's of an SDI signal to analog composite video (CVBS). A 10-bit DAC and special filtering techniques used in the design achieve low-artifact video output. The front panel of the CMA-9011 (-R) chassis provides power status LED for visual reference. In addition, user-selectable settings are available to place the CMA-9011 (-R) into the appropriate operating mode. Some of these modes are monochrome output, 75% color bar pattern and vertical interval blanking. The CMA-9011 (-R) provides conversion of 525 and 625 SDI signals (SMPTE 259M-C). NTSC, PAL and PAL-N standards are supported. It is supplied with universal power adapter and line cord suitable for the country of use. Various mounting options are included that allow wide range of installation choices.

NTSC, PAL, or PAL-N operation
10-bit DAC resolution
8-bit data processing
Four reclocked SDI outputs
Reclocking to reduce jitter and noise
2 low noise analog outputs
Automatic input cable equalization (>250m)
Color bar test signal with valid SDI input
Visual indicator LED for power status
Small brick form factor
5V universal adapter with locking DC connector

DA Video Input - Component
DA Video Input - SDI
DA Video Output - Composite
DA Video Output - SDI
Warranty - Yes

Current Draw: 0.43 Amps
DC Voltage: 5 Volts
Depth: 1 in
Height: 3.50 in
Width: 5 in
Product Weight: 0.69 lbs
Regulatory Compliance: FCC
Warranty (Length/Type): 3 Years
Input Return Loss: >19 dB (to 270MHz)
Input Equalization: Automatic, up to 26dB (250m of Belden 8281 cable) at 270Mbps
Input/Output Impedance: 75 ohms
SDI Output Return Loss: >20 dB (to 270MHz)
Signal Level: 800mV ±10%
DC Offset: <±50 mV
Rise and Fall Time: >750 ps (typical 20 to 80%)
Overshoot: <7 % (typical)
Transmission Range: 820 ft
Active Power: 2.20 Watt

Monitoring Amplifier 1337 kb - Other