Â
Pro AV Catalog
Request Quote
All Products
Multi-Definition SDI to Analog Component Converter Reclocked Output
Series: GearLite
Model: DAC-9213 (-R)
- Converts 270Mb/s and 1.485Gb/s SDI signals to analog component
- 11-bit data processing and 10-bit DAC
- Selectable YPbPr or RGB outputs
- Built-in proc amp functions
- SDI input is equalized up to 305m (1,000 ft.) of input cable at 270Mb/s or up to 100m (325 ft.) at 1.485Gb/s
Product Info
Tech Specs
Documents
The DAC-9213 (-R) is universal SDI to analog component converter for both SDI 270Mb/s and HD-SDI 1.485Gb/s. The DAC-9213 automatically equalizes up to 305m (1,000 ft.) of 1694A cable at 270Mb/s, and up to 100m (325 ft.) of Belden 1694A cable at 1.485Gb/s rates. Two reclocked outputs are provided on model DAC-9213-R. The converter automatically detects the input standard, supporting both SMPTE 259-C (270Mb/s) and SMPTE 292M (1.485Gb/s) standards. The converter supports the following formats: 480i, 576i,720p, 1080i. The SDI signal is converted with 11-bit processing and 10-bit DACs to three analog component signals: YPbPr or RGB. A built-in proc amp allows adjustments to levels, gain, setup, and blanking. The front panel of the DAC-9213 provides a visual indication of signal presence and error status. The DAC-9213 is supplied with a universal power adapter and line cord suitable for the country of use. Various mounting options are included that allow a wide range of installation choices. For additional mounting versatility, the DAC-9213 is available with a mounting option for select Sony PVM and BVM series monitors. With the DAC-9213-PVM, the module mounts directly within the monitor's rear option slot, and derives power from the monitor .
- Converts 270Mb/s and 1.485Gb/s SDI signals to analog component
- 11-bit data processing and 10-bit DAC
- Selectable YPbPr or RGB outputs
- Built-in proc amp functions
- SDI input is equalized up to 305m (1,000 ft.) of input cable at 270Mb/s or up to 100m (325 ft.) at 1.485Gb/s
- 2 reclocked SDI outputs (-R model)
- Small brick form factor
- 5V universal adapter with locking DC connector
- Optional mounting within Sony PVM and BVM series broadcast monitors (see model DAC-9213-PVM)
- Separate power and status LEDs
- 3-year warranty
- Converter Signal Types - Audio & Video
- Converter Type - Digital to Analog Converter
- Warranty - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 68 F
- Input Signal Types: Digital Video
- Output (Converted) Signal Type: Video and Audio
- Active Power: 3.75 Watt
- DC Voltage: 5 Volts
- Depth: 1 in
- Height: 4 in
- Width: 5 in
- Product Weight: 0.71 lbs
- Regulatory Compliance: FCC
- Warranty (Length/Type): 3 Years
- Current Draw: 0.75 Amps
- Input Impedance: 75 ohm (Terminating)
- Output Impedance: 75 ohm (Terminating)
- Number of input: 1
- Number of Output: 2 (Relocked)
Converter
1353 kb
- Other
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Ross Video
Model: DAC-9213 (-R)
Request more information from a dealer near you
close
Request more information from a dealer near you
Â