Pro AV Catalog

< Back to Previous Page

Home : Control Panels & Interfaces : RTS - KP-3016(A)

All Products

1RU, 16 Keys and IP Connection

Model: KP-3016(A)

Wide viewing-angle color screen
Ergonomic levers for talk/listen
Full support for OMNEO - KP-3016 Only
Support for 4-wire analog connection
Expansion panel option available

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

KP-Series keypanel family, the KP-3016 provides the same superior digital audio as the flagship KP-4016 model by using OMNEO media networking technology (developed by RTS parent company Bosch and incorporating Dante™ high-quality audio over IP) as well as analog technology. For the analog-only users, the KP-3016A is available. Both versions deliver top-notch sound quality, free of noise, delay, and other artifacts present in older technology

Wide viewing-angle color screen
Ergonomic levers for talk/listen
Full support for OMNEO - KP-3016 Only
Support for 4-wire analog connection
Expansion panel option available
Built-in speaker
Microphone input for dynamic or electret mics
User-replaceable XLR headset connector 4- or 5-pin available
Expansion panel available (EKP-3016)
Analog version available (KP-3016A)

UL Rated
Spec Sheet available - Yes

Operating Temperature (Maximum): 131 F
Operating Temperature (Minimum): 32 F
Certifications: CE
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Depth: 3.84 in
Height: 1.72 in
Width: 17.39 in
LCD Display:
•Active Area: 120.10mm (wide) x 35.86mm (high)
•Dot Resolution: 576 x 172 pixels
•Color Resolution: 16-bit (64K)RGB color
•View Angle: 80 degrees (typical; all directions)
•Type (relays): SPDT
•Contact Rating: 1AMP at 30VDC
Inputs:
•Type: Optically Coupled
•Input Voltage: 5-18 VDC on A+, A+ is internally pulled to 5VDC. Connect K- to to activate
Outputs:
•Type (relays): SPDT
•Contact Rating: 1AMP at 30VDC
Inputs Matrix:
•Type: Balanced
•Typical Input Level: +8dBu
•Typical Input Impedance: >10kOHMS
•Maximum Input Level: +20dBu
•Supported Bandwidth: 100Hz to 20KHz
Aux 1 and Aux 2:
•Type: Balanced
•Typical Input Level: +8dBu
•Typical Input Impedance: >10 k OHMS
•Front Panel Mic
•Type: Electret
•Typical Input Level: -42dBu
•Typical Input Impedance: 1kOHMS
•Maximum Input Level: -25dBu
Rear Panel Mic:
•Type: Electret
•Typical Input Level: -42dBu
•Typical Input Impedance: 1kOHMS
•Maximum Input Level: -25dBu
•Front and Rear Headset Mic - Electret
•Typical Input Level: -42dBu
•Typical Input Impedance: 1kOHMS
•Maximum Input Level: -25dBu
•Front and Rear Headset Mic - Dynamic
•Typical Input Level: -50dBu
•Typical Input Impedance: 600OHMS
•Maximum Input Level: -25dBu
Outputs Matrix:
•Type: Balanced
•Typical Output Level: +8dBu
•THD+N%: <0.20%
•Typical Output Impedance: 600OHMS
•Maximum Output Level: +20dBu
•Frequency Response: 100Hz to 20KHz
MIC/LINE Out:
•Type: Balanced
•Typical Output Level: +8dBu
•THD+N%: <0.20%
•Typical Output Impedance: 600OHMS
•Maximum Output Level: +20dBu
•Frequency Response: 100Hz to 20KHz
•Headset - Front, Rear, Left, Right
Maximum:
•Output Power: 125mW for 32OHMS load
•Earphone Impedance: 16OHMS and above
•THD+N%: <0.20%
•Frequency Response: 100Hz to 20KHz
Speaker - Rear:
•Maximum Output Power: 5W for 8W load
•Speaker Impedance: 4OHMS and 8OHMS
•THD+N%: <0.20%
•Frequency Response: 100Hz to 20KHz
Speaker - Front:
•SPL: 84dBSPL for 1kHz sine wave at 1m
Digital OMNEO Channels :
•Typical OMNEO Latency: 1ms
•Frequency Response: 20Hz - 20KHz
Weight: KP-3016: 3.35 lb (1.52 kg), Power Supply: 0.53lb (.24kg), Mounting Bracket: 0.30lbs (.14kg)

Control Panel 599510 kb - Data Sheet