Â
Pro AV Catalog
Request Quote
All Products
Fiber Optic Tranciever for Cellular Frequencies, GSM, PCS, and CDMA Base Station Links
Model: F-CELLULAR
- AGC function to realize auto gain compensation for optical transmission
- Transparent data transmission channel for data exchange
- Wide-band features for multi-system work
- Perfect optical and RF features
- Aplications: GSM optical repeater GSM optical repeater ,GSM over fiber, CDMA optical repeater ,CDMA over fiber, WCDMA optical repeater, WCDMA over fiber, RF over fibre for cellular coverage, Cell phone and 2-way radio over fiber and Radio over fiber
Product Info
Tech Specs
The F-CELLULAR systems are linear fiber optic transceivers for cellular over fiber applications specifically designed for high performance optical links between cellular base stations (BTSs), links between BTSs and microcells, or general radio over fiber (RF over Fiber) applications. We offer equipment for CDMA over fiber, GSM over fiber, WiMAX over fiber as well as more modern standards such as 3GPP over fiber. This is useful for extending the range of a wireless celluar network. When connected to a wireless antenna an F-CELLULAR unit amplifes the incoming RF signal, converts it to an optical signal, transports it over a fiber optic cable to a second F-CELLULAR unit, and then reconverts the signal back to an RF carrier for rebroadcast over a second antenna. This system can be used to extend coverage of a wireless cellular network to an area up to 120 km from the source. Our F-CELLULAR units are a low noise, radio frequency fiber optic transceiver for cellular over fiber applications. Our units are designed for applications such as CDMA over fiber, GSM over fiber, and other cellular over fiber applications. RS-232 control signals can also be carried over the same optical fiber. Our optics offer high linearity and superior performance over a wide range of operating temperatures. Operation over a single fiber is enabled through the incorporation of a WDM system at 1550 and 1310 nanometers.
- AGC function to realize auto gain compensation for optical transmission
- Transparent data transmission channel for data exchange
- Wide-band features for multi-system work
- Perfect optical and RF features
- Aplications: GSM optical repeater GSM optical repeater ,GSM over fiber, CDMA optical repeater ,CDMA over fiber, WCDMA optical repeater, WCDMA over fiber, RF over fibre for cellular coverage, Cell phone and 2-way radio over fiber and Radio over fiber
- Fiber Optic Connector Type - Other
- Fiber Optic Signals Supported - Other
- Active Power: 3.50 Watt
- Current Draw: 0.20 Amps
- DC Voltage: 15 Volts
- Operating Temperature (Maximum): 149 F
- Operating Temperature (Minimum): -4 F
- Optical Wavelength: 1310 ±20 nm (uplink) 1550 ±20nm (downlink)
- Optical Output Power: 4 dBm ±2dBm
- Optical Input Power: -16~6 dBm
- RF directivity @1700 ~ 1900 MHz: 40-45 dBc
- Response flatness @ 1400 ~ 1600 MHz: -137 dBm/Hz
- VSWR: 1.4
- IM3: -60 dBc
- Noise: <-135 dBm/Hz
- Isolation: 60 dB
- Emission: <-60 dBm/100KHz
- Delay: 60 ns
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Thor Fiber
Model: F-CELLULAR
Request more information from a dealer near you
close
Request more information from a dealer near you
Â