Â
Pro AV Catalog
Request Quote
All Products
HDMI Over Fiber Transmitter and Reciever
Model: F-HDMI
- Simple to read input and output signal indicators
- Supports HDTV resolutions up to 1080p
- Supports computer display resolution up to 1920/1200@60Hz
- Transmission distances of up to 50 miles possible with single mode fiber
- Easy setup with Plug and Play interfaces
Product Info
Tech Specs
Documents
The F-HDMI transmitter and receiver pair are used to carry HDMI video signals over longer distances. These units make long distance transportation of HDMI video over fiber easy. An HDMI signal connected to the F-HDMI transmitter is converted to an optical signal for transmission over a fiber optic cable. The F-HDMI receiver then receives the optical signal and converts it back to HDMI video. Fiber optic cables can transport signals to incredible distances, up to 50 miles for single mode fiber. HDMI video cables are expensive and have a very limited range, typically less than 50 ft. Longer runs of HDMI cables also experience significant distortion of the signal. The F-HDMI system allows a user to transport full uncompressed HDMI video at 1080i/1080p with up to 8 incorporated audio signals over a simple and inexpensive fiber optic cable. A simple passive DVI to HDMI adapter can also be used to transport DVI signals over the fiber. For extending set top boxes we also have a IR return path option. This uses an IR receiver at the receiving end to transmit commands from an IR remote over a return optical path. The IR signals are then rebroadcast via an included LED to control equipment on the transmitting end. Contact Thor today for help designing fiber optic distribution systems.
- Simple to read input and output signal indicators
- Supports HDTV resolutions up to 1080p
- Supports computer display resolution up to 1920/1200@60Hz
- Transmission distances of up to 50 miles possible with single mode fiber
- Easy setup with Plug and Play interfaces
- Optional IR remote control over seperate optical Return Path
- Fiber Optic Connector Type - Other
- Fiber Optic Signals Supported - Other
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Current Draw: 1.50 Amps
- DC Voltage: 12 Volts
- Depth: 1.38 in
- Height: 6.69 in
- Width: 3.94 in
- Regulatory Compliance: Complies with IEEE802.3zin in 1000BASE_LX
- Signal to Noise Ratio: 70 dB
- Resolutions: 720p, 1080i, 1080p, 800 x 600 to 1920 x 1200
- Interface: Supports HDMI Interface with HDCP Function
- Working Mode: Un-balance
- Max Input/Output Power Level: 5 dBu/4Vpp (stereo)
- Optical Receiver Sensitivity: -23 dBm
- Output Optical Modulation: 180 ?W
- Input Optical Modulation: <15 ?W
- Relative Speed: -116 dB/Hz
- Return Wave Loss: <10 dB
HDMI Over Fiber Transmitter and Reciever
403 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Texolve Digital Inc.
close
Texolve Digital Inc.
201A Ann Street
Oakmont, PA 15139
USA
(724) 337-1685
www.texolve.com
Contact in regards to this product:
Thor Fiber
Model: F-HDMI
Request more information from a dealer near you
close
Request more information from a dealer near you
Â